Steam tractor
From Wikipedia, the free encyclopedia
- This article refers to the steam-powered agricultural tractor; for other types of steam tractor, see: Traction engine
A steam tractor is a vehicle powered by a steam engine which is used for pulling.
In North America, the term steam tractor usually refers to a type of agricultural tractor powered by a steam engine, used extensively in the late 1800s and early 1900s.
In Great Britain, the term steam tractor is more usually applied to the smallest models of traction engine - typically those weighing seven tons or less - used for hauling small loads on public roads. Although known as light steam tractors, these engines are generally just smaller versions of the 'road locomotive'.
This article concentrates on the steam-powered agricultural vehicles intended for the direct-pulling of ploughs and other implements (as opposed to cable-hauling).
Contents |
[edit] Development (Great Britain)
Owing to differences in soil conditions, the development of steam-powered agricultural machines differed considerably on either side of the Atlantic.
In Great Britain, a number of traction engine builders attempted to produce a design of agricultural engine that could pull a plough directly, in place of a team of horses. However, the heavier and wetter soils found in Britain meant that these designs were not successful — being less economical to use than the team of horses they were intended to replace! These engines were also known as "steam tractors". Instead, farmers resorted to cable-hauled ploughing using ploughing engines.
A distinctive example of a British-designed (agricultural) steam tractor is the Garrett Suffolk Punch, a 1917 design intended to compete directly with internal combustion-powered alternatives.
[edit] Development (North America)
The first steam tractors that were designed specifically for agricultural uses were portable engines built on skids or on wheels and transported to the work area using horses. Later models used the power of the steam engine itself to power a drive train to move the machine and were first known as "traction drive" engines[citation needed] which eventually was shortened to "tractor".[citation needed] These drive mechanisms were one of three types: chain, shaft, and open pinion. The open pinion became the most popular design due to its strength. Later improvements included power steering, differentials, compounded engines, and butt-strap boiler design.
The steam engine was gradually phased out by the mid-1920s as the less expensive, lighter, and faster-starting internal combustion (kerosene, petrol or distillate) tractors fully emerged after World War I.
[edit] Uses
[edit] Threshing
These engines were used extensively in rural North America to aid in threshing, in which the owner/operator of a threshing machine or threshing rig would travel from farmstead to farmstead threshing grain. Oats were a common item to be threshed, but wheat and other grains were common as well. On a "threshing day", all the neighbors would gather at that day's farmstead to complete a massive job in one day through cooperation. The women and older girls were in charge of cooking the noon meal and bringing water to the men. The children had various jobs based upon their age and sex. These jobs included driving the bundle racks, pitching bundles into the threshing machine, supplying water for the steam engine, hauling away the freshly threshed grain and scooping it into the granary. Steam traction engines were often too expensive for a single farmer to purchase, so "threshing rings" were often formed. In a threshing ring, multiple farmers pooled their resources to purchase a steam engine. They also chose one person among them to go to a steam school, to learn how to run the engine properly. There were also threshing contractors, who owned their own engine and thresher, and went to different farms, hiring themselves out to thresh grain.
[edit] Ploughing
The immense pulling power of steam tractors allowed them to be used for ploughing as well. Certain steam tractors were better suited for ploughing than others, with the large Minneapolis Threshing machine Co., J.I. Case, Reeves and Advance-Rumely engines being prime examples. Some of the largest steam tractors, such as the 150-horsepower Case, were capable of pulling 30 or more plough bottoms, while most were powerful enough to pull between 6 and 20. Differing soil conditions highly affected the ploughing abilities of these tractors.
[edit] Manufacturers
[edit] Festivals and museums
- Western Minnesota Steam Thresher's Reunion (Rollag, Minnesota, USA)
- Nowthen Threshing Show (Nowthen, Minnesota, USA)
- Rough and Tumble Engineers Historical Association (Kinzers, Pennsylvania, USA)
- Antique Gas & Steam Engine Museum (Vista, California, USA)
- Ontario Agricultural Museum (Ontario, Canada)
- Steam Era (Milton, Ontario, Canada)
- Threshermen's Reunion (Austin, Manitoba, Canada)
- Fort Edmonton Park (Edmonton, Alberta, Canada)
[edit] See also
[edit] External links
- Video – Victorian agricultural engine, in steam, driving a threshing machine
- Tri-state Gas Engine and Tractor Association Inc Portland, Indiana, U.S. – organisers of "the world's largest antique engine and tractor show" (their claim) (NB: mainly internal combustion engines)
- National Threshers Association Luckey, Ohio - An association of steam threshers who hold a steam show at the Fulton County Fairgrounds in Wauseon, Ohio during the last weekend of June every year.
- Steam Tractors - The first of a three part account by Mike Rooth of these engines at work. Parts Two and Three are also found on the same site.
