Sinus-lift procedure

From Wikipedia, the free encyclopedia

A sinus-lift procedure is a surgical procedure, performed by an appropriately trained dentist or dental specialist, to augment bone mass in the top jaw (maxilla), which increases the likelihood of successful placement of dental implants. Bone from another part of the body, such as the iliac crest, or artificial bone grafting material is grafted into the bone (endosseous) below the floor of the maxillary sinus. In the upper jaw the amount of bone is reduced by the presence of the sinus. A number of techniques are used to increase the bone height:

Onlay grafts
Interpositional (Lefort I) grafts
Inlay grafts for nasal floor
Sinus-lift and grafting

1 History
2 Surgical techniques
3 Complications
4 References
5 External links

[edit] History

A sinus-lift procedure was first performed by Dr. O.H. Tatum Jr. Boyne and James were the first to report their 4-year experiences with autogenous grafts placed into the sinus and allowed to heal for 6 months, which was followed by the placement of blade implants. In 1986, Tatum described his techniques for raising the sinus membrane, from a lateral and from an inferior approach.

[edit] Surgical techniques

Today, there are several variations of sinus lift procedure, these are the most common:

Lateral Window approach (opening a window in the buccal bone) - Invented by Tatum in 1986 - A crestal incision is made with vertical extensions and the lateral aspect of the maxilla is exposed. Then the osteotomy is completed. The lateral wall with the sinus membrane is rotated medially into the sinus. The sinus membrane can fold on itself when reflected medially. Implant sites can be prepared and implants placed at this stage. The medial part of the sinus is grafted first. After the implants have been placed, the remaining lateral part of the sinus defect is grafted. The flaps are relieved and closed primarily. The graft is left for 6–9 months. Implant placements should be delayed if they cannot be properly stabilised, to prevent complications.

The Osteotome approach (cracking the crestal bone) - Invented by Summer in 1994 - A crestal incision is made, and the crestal ridge is exposed. A sharp osteotome is used to "chisel" a rectangle in the crestal ridge of the maxilla, then a sinus-lift osteotome is used like a mallet to fracture the bone, and punch a hole through where the rectangle was created into the sinus floor. The sinus is then raised with bone grafting material and implants are placed.

Hydraulic Sinus Condensing (drilling a hole into crestal bone) - Invented by Chen in 2005 - A crestal incision is made, exposing the crestal ridge of the maxilla. An osteotomy is initiated on the crestal ridge, and water pressure is used to gently raise the sinus membrane from the sinus floor. Then the sinus membrane is raised with bone grafting material, and implants are placed.

[edit] Complications

Graft failure
Infection
Oral antral fistula
Sinusitis
Tilting or loosening of implants

[edit] References

Raghoebar GM, Timmenga NM, Reintsema H, Stegenga B, Vissink A. Maxillary bone grafting for insertion of endosseous implants: results after 12-124 months. Clin Oral Implants Res 2001; 12(3): 279-86. PMID 11359486

Bilateral Sinus Lifts with SynthoGraft Using Floor Transport Technique with Sinus Lift Temporary Abutments, Two Stage Placements, and Restoration with Twelve Maxillary Full Arch Integrated Abutment Crowns.

Chen, Leon, & Cha, Jennifer, An 8-Year Retrospective Study: 1,100 Patients Receiving 1,557 Implants using the Minimally Invasive Hydraulic Sinus Condensing Technique, 'Innovations in Periodontics, Volume 76, Number 3, March, 2005