Rat rod
From Wikipedia, the free encyclopedia
 |
This article does not cite any references or sources. (November 2007) Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed. |
"Rat Rod" is a style of Hot Rod or Custom car that, in most cases, imitates (or exaggerates) the early hot rods of the 40s, 50s, and 60s. It is not to be confused with the somewhat closely related "Traditional" Hot Rod, which is an accurate re-creation or period-correct restoration of a Hot Rod from the same era.
Most Rat Rods appear "unfinished" (whether they actually are or are not), with just the bare essentials to be driven.
The Rat Rod is the visualization of the idea of function over form. Rat Rods are meant to be driven, not shown off. Sometimes the customization will include using spare parts, or parts from another car altogether.
Contents |
[edit] Definition of Rat Rod
Originally a counter-reaction to the 50s "Hot Rod", a label recently applied to undriven cars and super high priced "customs". The "Rat Rod"'s beginning was a throwback to the Hot Rods of the earlier days of Hot Rodding, built to the best of the owner's abilities and meant to be driven. Rat Rods are meant to loosely imitate in form and function, the "Traditional" Hot Rods of the era. Biker, greaser, rockabilly, and punk culture is often credited as influence that shapes of Rat Rodding.
The typical rat rod (an early 1920s through 1950s coupe or roadster): Early (pre-World War II) vehicles often have their fenders, hoods, running boards, and bumpers removed. The bodies are frequently channeled over the frame, and sectioned, or the roofs chopped for a lower profile. Later post-war vehicles are rarely constructed without fenders and are often customized in the fashion of Kustoms, leadsleds, and low-riders. Maltese crosses, skulls, and other accessories are often added. Chopped tops, shaved trim, grills, tail lights, and other miscellaneous body parts are swapped between makes and models. Most, if not all of the work and engineering is done by the owner of the vehicle.
Recently, the term "Rat Rod" has been used to describe almost any vehicle that appears unfinished or is built simply to be driven, whether or not the vehicle would have been customized or even existed during the 50s.
[edit] General
[edit] Paint and Finish
Many Rat Rods appear unfinished with primer paint jobs being common. Other finishes may include “natural patina” (the original paint with rust and blemishes intact), a patchwork of original paint and primer, or bare metal with no finish at all in rusty or oiled varieties. Many rat rods also have free handpinstriping done by the owners with a pinstriping brush.Contrary to tastes of many car builders, rust is often acceptable and appreciated by a Rat Rodder.
[edit] Interior
Interiors of rat rods vary from fully finished to a spartan, bare bones form. Mexican blankets and bomber seats form the basis of many rat rod interiors. Most are designed to be functional without many comforts although this will vary with the owner’s taste.
[edit] Drive Train
Though a variety of engines may be used, the most common are to be found in a Rat Rod are Flathead V8's, early Chrysler Hemi engines, or more modern Small Block V8's from any manufacturer, especially Chevrolet. It is not uncommon to see straight-8s straight-6s, straight-4s, V6s or even diesel engines. These engines may exhibit varying displacements and modifications.
Most Rat Rods are rear wheel drive, with an open driveline. The rear-ends are typically passenger vehicle pieces, as are the transmissions. The Ford Banjo rear-end is popular, as is the "Quickchange" type as used in many early hot rods.
[edit] Suspension
A beam axle is commonly accepted as the only type of front suspension that will look right when exposed without fenders on a vehicle with open front suspension. Independent front suspension is discouraged, Most Rat Rods use a 1928-1948 Ford I beam axle with a transverse leaf spring. Although any solid axle is acceptable, the Ford axle is preferred due to the availability of spare parts.
Springs vary from transverse, parallel and coil setups in the front and rear. Parallel is not seen as frequently as the more common single-spring transverse setup, though both are used commonly. Coil springs are often deemed unsightly without fenders, but are still occasionally seen.
[edit] Criticism
Preservationists believe that modification of any rare surviving historical vehicle should be discouraged. In addition, traditional Hot Rodders criticize Rat Rods as mere imitations or anachronistic. Also, many Rat Rods are criticized for extreme proportions and superficial modifications that leave function and safety secondary to immediate shock value.
[edit] Origins
The December 1972 issue of Rod & Custom Magazine was dedicated to the beater, a low-budget alternative to the over-polished, slickly-painted, customized early car. The beater could easily be considered a progenitor of the rat rod. However, owners of these beaters often had a high-dollar machine sitting in their garage: no expensive upholstery, primered if painted at all, no chromed and polished Corvette/Jaguar rear ends.
As with many cultural terms, there are disputes over the origin of the term "rat rod". Some say it first appeared in an article written in Hot Rod Magazine by Gray Baskerville about cars that still sported a coat of primer. Some claim that the first rat rod was owned by artist Robert Williams who had a '32 Ford Roadster that was painted in primer. Although the term likely started out as derogatory or pejorative (and is still used in this way by many), members of the subcultures that build and enjoy these cars have adopted the term in a positive light.
[edit] References
- Club de rat rod de Argentina Argentina. Retrieved on September 11, 2007.
