Nokia M1122

From Wikipedia, the free encyclopedia

This article is orphaned as few or no other articles link to it.
Please help introduce links in articles on related topics. (August 2007)

This article may not meet the general notability guideline or one of the following specific guidelines for inclusion on Wikipedia: Biographies, Books, Companies, Fiction, Music, Neologisms, Numbers, Web content, or several proposals for new guidelines. If you are familiar with the subject matter, please expand or rewrite the article to establish its notability. The best way to address this concern is to reference published, third-party sources about the subject. If notability cannot be established, the article is more likely to be considered for redirection, merge or ultimately deletion, per Wikipedia:Guide to deletion.
This article has been tagged since August 2007.

The Nokia M1122 is a 4-port ADSL router that is known to have been sold in Europe and New Zealand in 2000-2002. In addition to its main task, the M1122 is capable of acting as a 10 Mbit/s hub in a local area network.

The M1122 had a sister model, Nokia MW1122, with Wireless LAN capabilities. These two were the last ADSL routers ever to be manufactured by Nokia. In the last half of 2002 the model was discontinued along with the rest of Nokia's ADSL router operations.

1 Technical specifications
2 Administration interface
3 References
4 External links

[edit] Technical specifications

ANSI T1.413 Issue 2 (chipset by Alcatel)
can be used either in routed or bridged mode
connectors: ADSL line cord to the phone plug, power cord, CLI port, power switch and four 10Base-T Ethernet ports
LEDs: power, status, ADSL line and 4*Ethernet
dimensions: width 22.5 cm, height 6.5 cm, depth 23 cm, weight 1 kg
Internal power supply: 100 - 240 V

[edit] Administration interface

There are two ways to do maintenance work in M1122. The preferred way to do that is via a Web interface. Users can, however, also choose to enter commands in a text-based console that can be reached both through telnet and with a special CLI cable whose other end is attached to the computer's COM port. The router has a limitation, that when bridged mode is turned on, the CLI cable is the only way to maintain it.

The CLI connector is a RJ-45 female connector with a pinout similar to EIA/TIA - 561 but crosslinked, swapping the DTE and DCE roles. [1]

[edit] References

This article or section includes a list of references or external links, but its sources remain unclear because it lacks in-text citations.
You can improve this article by introducing more precise citations.