Multi-axle bus
From Wikipedia, the free encyclopedia
A multi-axle bus is a bus or coach that has more than the standard two axles, usually three (tri-axle bus) or more rarely, four (quad-axle).[citation needed] Extra axles are usually added for weight restriction reasons, or to accommodate different vehicle designs such as articulation, or rarely, to implement trailer buses.
Contents |
[edit] History
An early example of a multi-axle bus was a one-off 3 axle Crossley Condor [1] built for the 1932 Scottish Bus Show.[1]
[edit] Reasons for multiple axles
Usually vehicle licensing authorities of different countries will set legal limits on the amount of weight that can be distributed on one axle. In the UK, a recent extension to the legal limit on the length of rigid buses and coaches has led to the increased use of 3 axles to accommodate the heavier chassis and passenger load. Certain countries apply exceptions to vehicle rules for specific operations.
Extra axles may also be provided on shorter buses and coaches to accommodate extra equipment loads, such as passenger lifts, or comforts such as toilets, televisions, climate controls.
Adding axles to chassis designs is done for specific reasons such as weight or legalities, as having extra axles means extra costs for the operator in terms of tyre replacement, and to an extent, higher fuel consumption.
[edit] Rigid chassis
Tri-axle double decker buses are common in high capacity operating environments where articulated buses are not used, such as Hong Kong and Singapore. Tri-axle buses also see high volume use in Dublin, Ireland. Imported tri-axle buses were used initially by Megabus for high capacity low cost intercity travel in the UK.
Tri-axle double decker coaches have been used to accommodate the extra weight. Models are also being introduced on high capacity inter-city routes, such as by the operator Megabus.
A twin steer coach is a rare type of Tri-axled coach where the double axles are in the front and steer, as in the Bedford VAL.[2]
The Neoplan Megaliner was the first quad axle double decker coach, and is used in Japan. Further examples include the Scania K380 8x2 [3].
[edit] Articulated chassis
Tri-axle is the standard arrangement of two part articulated buses.
Quad-axle arrangement is sometimes employed on articulated buses to accommodate the extra weight of coach bodies, such as in this quad axle articulated coach [4] and the quad axle double deck articulated coach, the Neoplan Jumbocruiser.
Quad-axle arrangement is also the exclusive arrangement for three part Bi-articulated buses.
A rare reason[citation needed] why a bus may have multiple axles is in the case of a trailer bus, where the bus passenger cabin is built as a body semi-trailer towed by a separate tractor unit.
[edit] Gallery
A tri-axle Mercedes-Benz Citaro articulated bus |
A tri-axle coach in the United States |
A tri-axle Mitsubishi Fuso Aero Queen W |
|
A quad-axle Neoplan Jumbocruiser double deck articulated bus |
A quad-axle Mercedes-Benz O530 Citaro GL 'CapaCity' articulated bus |
||
A Brazilian quad axle coach by Marcopolo S.A. |
[edit] See also
|