Mortgage-backed security
From Wikipedia, the free encyclopedia
 |
The examples and perspective in this article or section may not represent a worldwide view of the subject. Please improve this article or discuss the issue on the talk page. |
 |
This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (May 2008) |
 |
The factual accuracy of this article or section may be compromised due to out-of-date information. You can improve the article by updating it. There may be information on the talk page. |
In finance, a mortgage-backed security (MBS) is an asset-backed security whose cash flows are backed by the principal and interest payments of a set of mortgage loans. Payments are typically made monthly over the lifetime of the underlying loans. [1] [2].
Residential mortgagors in the United States have the option to pay more than the required monthly payment (curtailment) or to pay off the loan in its entirety (prepayment). Because curtailment and prepayment affect the remaining loan principal, the monthly cash flow of an MBS is not known in advance, and therefore presents an additional risk to MBS investors.
Commercial mortgage-backed securities (CMBS) are secured by commercial and multifamily properties (such as apartment buildings, retail or office properties, hotels, schools, industrial properties and other commercial sites). The properties of these loans vary, with longer-term loans (5 years or longer) often being at fixed interest rates and having restrictions on prepayment, while shorter-term loans (1-3 years) are usually at variable rates and freely prepayable.
Contents |
[edit] Market size and liquidity
The total market value of all outstanding U.S. MBS at the end of the first quarter of 2006 was approximately USD 6.1 trillion, according to The Bond Market Association. This is much larger than the market value of outstanding asset-backed securities. The MBS market overtook the market for US Treasury notes and bonds in 2000.
According to The Bond Market Association, gross U.S. issuance of agency MBS was:
- 2005: USD 967 billion
- 2004: USD 1,019 billion
- 2003: USD 2,131 billion
- 2002: USD 1,444 billion
- 2001: USD 1,093 billion
The high liquidity of most mortgage-backed securities means that any investor wishing to take a position need not deal with the difficulties of theoretical pricing described below; the price of any bond is essentially quoted at fair value, with a very narrow bid/offer spread.
Reasons (other than speculation) for entering the market include the desire to hedge against a drop in prepayment rates (a critical business risk for any company specializing in refinancing) and certain predatory lending schemes.
[edit] Structure and features
 |
Please help improve this article or section by expanding it. Further information might be found on the talk page or at requests for expansion. (February 2008) |
[edit] Weighted-average maturity
The weighted-average maturity (WAM) of an MBS is the average of the maturities of the mortgages in the pool, weighted by their balances at the issue of the MBS. Note that this is an average across mortgages, as distinct from concepts such as weighted-average life and duration, which are averages across payments of a single loan.
To illustrate the concept of WAM, let's consider a mortgage pool with just three mortgage loans that have the below mentioned outstanding mortgage balances, mortgage rates, and months remaining to maturity.
| Loan | Outstanding Mortgage Balance | Mortgage Rate | Remaining Months to Maturity | Each Loan's Weighting |
|---|---|---|---|---|
| Loan 1 | $200,000 | 6.00% | 300 | 22.22% |
| Loan 2 | $400,000 | 6.25% | 260 | 44.44% |
| Loan 3 | $300,000 | 6.50% | 280 | 33.33% |
The weightings are computed by dividing each outstanding loan amount by total amount outstanding in the mortgage pool (i.e., $900,000). These amounts are the outstanding amounts at the issuance/initiation of the MBS. Now, the WAM for the above mortgage pool that consists of three loans is computed as follows:
WAM = 22.22% (300) + 44.44% (260) + 33.33% (280)
= 66.67 + 115.56 + 93.33
= 275.56 Months or 276 months after rounding
[edit] Weighted-average coupon
The weighted average coupon (WAC) of an MBS is the average of the coupons of the mortgages in the pool, weighted by their original balances at the issuance of the MBS.
[edit] Why and where we use WAM and WAC?
WAM and WAC are used for describing a mortgage passthrough security, and they form the basis for the computation of cash flows from that mortgage passthrough. Just as we describe a bond by saying 30 year bond with 6% coupon, we describe a mortgage passthrough by saying, for example, "this is a $3 billion passthrough with 6% passthrough rate, 6.5% WAC, and 340 month WAM."
Note here, the passthrough rate is different from WAC. The passthrough rate is the rate that the investor would receive if he/she holds this mortgage passthrough security (or simply mortgage passthrough). Almost always, the passthrough rate is less than the WAC. The difference goes to servicing (i.e., costs incurred in collecting the loan payments and transferring the payments to the investors) the mortgage loans in the pool.
[edit] Types
Any bond ultimately backed by mortgages is classified as an MBS. This can be confusing, because securities derived from MBS are also called MBS(s). To distinguish the basic MBS bond from other mortgage-backed instruments the qualifier pass-through is used, in the same way that 'vanilla' designates an option with no special features.
Mortgage-backed security sub-types include:
- Pass-through mortgage-backed security is the simplest MBS, as described in the sections above. Essentially, a securitization of the mortgage payments to the mortgage originators. These can be subdivided into:
- Residential mortgage-backed security (RMBS) - a pass-through MBS backed by mortgages on residential property
- Commercial mortgage-backed security (CMBS) - a pass-through MBS backed by mortgages on commercial property
- Collateralized mortgage obligation (CMO) - a more complex MBS in which the mortgages are ordered into tranches by some quality (such as repayment time), with each tranche sold as a separate security.
- Stripped mortgage-backed securities (SMBS): Each mortgage payment is partly used to pay down the loan's principal and partly used to pay the interest on it. These two components can be separated to create SMBS's, of which there are two subtypes:
- Interest-only stripped mortgage-backed securities (IO) - a bond with cash flows backed by the interest component of property owner's mortgage payments.
- Principal-only stripped mortgage-backed securities (PO) - a bond with cash flows backed by the principal repayment component of property owner's mortgage payments.
Varieties of underlying mortgages in the pool:
- Prime: conforming mortgages: prime borrowers, full documentation (such as verification of income and assests), strong credit scores, etc.
- Alt-A: an ill-defined category, generally prime borrowers but non-conforming in some way, often lower documentation (or in some other way: vacation home, etc.) (Article on Alt-A)
- Subprime: weaker credit scores, no verification of income or assets, etc.
There are also jumbo mortgages, when the size is bigger than the "conforming loan amount" as set by FannieMae.
[edit] Covered bonds
In Europe exists a type of asset-backed bonds called "covered bonds" (commonly known by the German term Pfandbriefe). Pfandbriefe were first created in 19th century Germany when Frankfurter Hypo began issuing mortgage covered bonds. The market has been regulated since the creation of a law governing the securities in Germany in 1900. The key difference between Pfandbriefe and mortgage-backed or asset-backed securities is that banks that make loans and package them into Pfandbriefe keep those loans on their books. This means that when a company with mortgage assets on its books issue the covered bond its balance sheet grows, which it wouldn't do if it issued an MBS, although it may still guarantee the securities payments.[citation needed]
[edit] Uses
There are many reasons for mortgage originators to finance their activities by issuing mortgage-backed securities. Mortgage-backed securities
- transform relatively illiquid, individual financial assets into liquid and tradeable capital market instruments.
- allow mortgage originators to replenish their funds, which can then be used for additional origination activities.
- can be used by Wall Street banks to monetise the credit spread between the origination of an underlying mortgage (private market transaction) and the yield demanded by bond investors through bond issuance (typically, a public market transaction).
- are frequently a more efficient and lower cost source of financing in comparison with other bank and capital markets financing alternatives.
- allow issuers to diversify their financing sources, by offering alternatives to more traditional forms of debt and equity financing.
- allow issuers to remove assets from their balance sheet, which can help to improve various financial ratios, utilise capital more efficiently and achieve compliance with risk-based capital standards.
[edit] Pricing
[edit] Theoretical pricing
Pricing a vanilla corporate bond is based on two sources of uncertainty: default risk (credit risk) and interest rate (IR) exposure.[citation needed] The MBS adds a third risk: early redemption (prepayment). The number of homeowners in residential MBS securitizations who prepay goes up when interest rates go down. One reason for this phenomenon is that homeowners can refinance at a lower fixed interest rate. Commercial MBS often mitigate this risk using call protection.[citation needed]
Since these two sources of risk (IR and prepayment) are linked, solving mathematical models of MBS value is a difficult problem in finance. The level of difficulty rises with the complexity of the IR model, and the sophistication of the prepayment IR dependence, to the point that no closed form solution (i.e. one you could write it down) are widely known. In models of this type numerical methods provide approximate theoretical prices. These are also required in most models which specify the credit risk as a stochastic function with an IR correlation. Practitioners typically use Monte Carlo method or Binomial Tree numerical solutions.
[edit] Interest rate risk and prepayment risk
Theoretical pricing models must take into account the link between interest rates and loan prepayment speed. Mortgage prepayments are most often made because a home is sold or because the homeowner is refinancing to a new mortgage, presumably with a lower rate or shorter term. Prepayment is classified as a risk for the MBS investor despite the fact that they receive the money, because it tends to occur when floating rates drop and the fixed income of the bond would be more valuable (negative convexity). Hence the term: prepayment risk.
To compensate investors for the prepayment risk associated with these bonds, they trade at a spread to government bonds.
There are other drivers of the prepayment function (or prepayment risk), independent of the interest rate, for instance:
- Economic growth, which is correlated with increased turnover in the housing market
- Home prices inflation
- Unemployment
- Regulatory risk; if borrowing requirements or tax laws in a country change this can change the market profoundly.
- Demographic trends, and a shifting risk aversion profile, which can make fixed rate mortgages relatively more or less attractive.
[edit] Credit risk
The credit risk of mortgage-backed securities depends on the likelihood of the borrower paying the promised cash flows (principal and interest) on time. The credit rating of MBS is fairly high because:
- The mortgage originator will generally research the mortgage taker's ability to repay, and will try to lend only to the credit-worthy.
- Some MBS issuers, such as Fannie Mae, Freddie Mac, and Ginnie Mae, guarantee against homeowner default risk. In the case of Ginnie Mae, this guarantee is backed with the full faith and credit of the US Federal government. This is not the case with Fannie Mae or Freddie Mac, but these two entities have lines of credit with the US Federal government; however, these lines of credit are extremely small when compared with the average amount of money circulated through Fannie Mae or Freddie Mac in one day's business.
- Pooling many mortgages with similar default probabilities creates a bond with a much lower probability of total default, in which no homeowners are able to make their payments (see Copula). Although the risk neutral credit spread is theoretically identical between a mortgage ensemble and the average mortgage within it, the chance of catastrophic loss is reduced.
- If the property owner should default, the property remains as collateral. Although real estate prices can move below the value of the original loan, this increases the solidity of the payment guarantees and deters borrower default.
If the MBS was not underwritten by the original real estate & the issuer's guarantee the rating of the bonds would be very much lower. Part of the reason is the expected adverse selection against borrowers with improving credit (from MBSs pooled by initial credit quality) who would have an incentive to refinance (ultimately joining an MBS pool with a higher credit rating).
[edit] Real-world pricing
Most traders and money managers use Bloomberg and Intex to analyze MBS pools. Intex is also used to analyze more esoteric products. Some institutions have also developed their own proprietary software. TradeWeb is used by the largest bond dealers ("primaries") to transact round lots ($1 million+).
For "vanilla" or "generic" 30-year pools (FN/FG/GN) with coupons of 4% - 7%, one can see the prices posted on a TradeWeb screen by the primaries called To Be Announced (TBA). This is due to the actual pools not being shown. These are forward prices for the next 3 delivery months since pools haven't been cut — only the issuing agency, coupon and dollar amount are revealed. A specific pool whose characteristics are known would usually trade "TBA plus {x} ticks" or a "pay-up" depending on characteristics. These are called "specified pools" since the buyer specifies the pool characteristic he/she is willing to "pay up" for.
The price of an MBS pool is influenced by prepayment speed, usually measured in units of CPR or PSA. When a mortgage refinances or the borrower prepays during the month, the prepayment measurement increases.
If the buyer acquired a pool at a premium (>102), as is common for higher coupons then they are at risk for prepayment. If the purchase price was 105, the investor loses 5 cents for every dollar that's prepaid, possibly significantly decreasing the yield. This is likely to happen as holders of higher-coupon MBS have good incentive to refinance.
Conversely, it may be advantageous to the bondholder for the borrower to prepay if the low-coupon MBS pool was bought at a discount. This is due to the fact that when the borrower pays back the mortgage he does so at "par". So if the investor bought a bond at 95 cents on the dollar, as the borrower prepays he gets the full dollar back and his yield increases. This is unlikely to happen as holders of low-coupon MBS have very little incentive to refinance.
The price of an MBS pool is also influenced by the loan balance. Common specifications for MBS pools are loan amount ranges that each mortgage in the pool must pass. Typically, high premium (high coupon) MBS backed by mortgages no larger than 85k in original loan balance command the largest pay-ups. Even though the borrower is paying an above market yield, they are dissuaded to refinance a small loan balance due to the high fixed cost involved.
Low Loan Balance: < 85k
Mid Loan Balance: Between 85k - 110k
High Loan Balance: Between 110k - 150k
Super High Loan Balance: Between 150k - 175k
TBA: > 175k
[edit] See also
- Commercial mortgage-backed security
- Residential mortgage-backed security
- Subprime mortgage crisis
- New Century Financial
- Countrywide Financial
- Securitization
- Structured finance
- United States housing bubble
[edit] References
[edit] External links
- FannieMae's Mortgage-Backed Securities page, including an MBS locator by CUSIP, Pool or Trust Number
|
||||||||||||||||||||||||||
|
||||||||
