IBM 729

From Wikipedia, the free encyclopedia

The IBM 729 Magnetic Tape Unit was IBM's iconic tape mass storage system from the late 1950s through the mid 1960s. Part of the IBM 7 track family of tape units, it was used on late 700, most 7000 and many 1400 series computers. Like its predecessor, the IBM 727 and many successors, the 729 used 1/2 inch (12.7 mm) magnetic tape up to 2400 feet (730 meters) long wound on reels up to 10-1/2 inch (267 mm) diameter. To allow rapid tape acceleration, long vacuum columns were placed between the tape reels and the read/write heads.

Contents 1 Data format 2 Models 2.1 729 I 2.2 729 II 2.3 729 III 2.4 729 IV 2.5 729 V 2.6 729 VI 3 References 4 External links

[edit] Data format

The tape had seven parallel tracks, six for data and one to maintain parity. Tapes with character data (BCD) were recorded in even parity. Binary tapes used odd parity. (709 manual p. 20) Aluminum strips were glued several feet from the ends of the tape to serve as logical beginning and end of tape markers. Write protection was provided by a removable plastic ring in the back of the tape reel. A 3/4 inch gap between records allowed the mechanism time to stop the tape. Initial tape speed was 75 inches per second (2.95 m/s) and recording density was 200 characters per inch. Later 729 models supported 556 and 800 characters/inch. At 200 characters per inch, a single 2400 foot tape could store the equivalent of some 50,000 punch cards (about 4,000,000 six-bit bytes).

The 729 series was superseded by 9 track tape drives introduced with the IBM System/360.

[edit] Models

In early development, the prototype 729 had two status lights labeled Select and Idle. One day a vice president visited the lab and noticing this told the Engineers "That is not acceptable! IBM machines are NEVER idle!" The labels on the lights were quickly changed to Select and Ready.

[edit] 729 I

The IBM 729 I was introduced for the IBM 709 and IBM 705 III computers, looked identical to the IBM 727, and used vacuum tubes. The main improvement was the use of a dual gap head permitting write verify.

[edit] 729 II

The IBM 729 II was introduced for the IBM 7000 series computers, introducing a new cabinet style and transistorized circuitry. Supported dual density (200, 556).

[edit] 729 III

High speed (112.5 in/s) single density (556).

[edit] 729 IV

High speed (112.5 in/s) dual density (200, 556).

[edit] 729 V

High density (800).

[edit] 729 VI

High speed (112.5 in/s) high density (800).

[edit] References

• IBM 709 Data Processing System, Form A22-6501-0

[edit] External links

• Bitsavers.org Magnetic Tape Equipment manuals (PDF files)

v • d • e Magnetic tape data storage formats Three Quarter Inch (19 mm) Linear LINCtape (1962) • DECtape (1963) Helical Sony DIR (19xx) • Ampex DST (1992) Half Inch (12.65 mm) Linear UNISERVO (1951) • IBM 7 track (1952) • 9 track (1964) • IBM 3480 (1984) • DLT (1984) • IBM 3590 (1995) • T9840 (1998) • IBM 3592 (?) • T9940 (2000) • LTO Ultrium (2000) • T10000 (2006) Helical Redwood SD-3 (1995) • DTF (19xx) • SAIT (2003) Eight Millimeter (8 mm) Linear Travan (1995) • IBM 3570 MP (1997) • ADR (1999) Helical Data8 (1987) • Mammoth (1994) • AIT (1996) • VXA (1999) Quarter Inch (6.35 mm) Linear QIC (1972) • SLR (1986) • Ditto (1992) Eighth Inch (3.81 mm) Linear KC Standard, Compact Cassette (1975) • HP DC100 (1976) • Commodore Datassette (1977) • DECtapeII (1979) Helical DDS/DAT (1989) Stringy (1.58 - 1.9 mm) Linear Exatron Stringy Floppy (1979) • ZX Microdrive (1983) • Rotronics Wafadrive (1984)