Flat-12
From Wikipedia, the free encyclopedia
A flat-12 is an internal combustion engine in a flat configuration, having 12 cylinders.
The flat-12 is wider (but significantly lower in height) than a V12 . Despite the advantage of having a lower center of gravity than a V12, that advantage can be somewhat offset by the need for a higher mounting height in the engine bay to provide clearance for the exhaust system (six runners on either side). Whereas a V12 can be used in front-engined or mid-engined applications, a flat-12 is used exclusively in mid-engined sports cars. In addition, because it has no advantage in terms of vibrations, the design is rarely used on production cars.
Flat-12 engines are generally are not true horizontally opposed engines (boxer), but rather 180° V-engines. A true boxer has one crank pin per piston, while in the 180° V-engine two pistons share the same crank pin. With twelve cylinders both layouts are perfectly balanced.
The flat design was used in Formula One and Endurance racing. However, when wing-cars requiring air-flow venturis came along in the late 1970s, the wide, flat layout obstructed the airflow and became obsolete.
In 1964-65, at the end of the 1.5 litre F1 era, Ferrari introduced a flat-12 on the Ferrari 512, but a more classical V12 was chosen for the new 3 litre F1.
The Porsche 917 endurance racing car (introduced in 1969, for the Sport category) was powered by an air-cooled flat-12. This engine was an evolution of the Porsche flat-8 boxer engine and used identical cylinders to those found on the 908, but differed in that it used a V12 type crankshaft.
The domination of the Porsche 917 over the V12-powered Ferrari 512 probably influenced Ferrari, because they returned to the flat-12 in 3 litre water-cooled form for their prototypes and Formula One cars.
The Ferrari flat-12 design was successful and influential especially on Italian manufacturers, including Alfa-Romeo, who were also successful in endurance with a flat-12. The Tecno Formula One flat-12 was a failure, however.
A 4.4-5.0 L 180° V12 was later introduced by Ferrari in some of their production models, including the Berlinetta Boxer and Testarossa.
Motori Moderni designed a 3.5 litre flat-12 engine for Subaru, which would be used in the 1990 Coloni Formula One car. The Coloni−Subaru was not competitive and did not start a Grand Prix. The Motor Moderni flat 12 engine also appeared in detuned form in the Jiotto Caspita supercar. This only appeared in a single prototype and was not put into production.
In the early 1990's Mercedes-Benz built their 3.5-litre M291 flat-12 for endurance racing. This engine employed a clever cylinder-head design with the exhaust ports on the top, facing straight up, resulting in the exhaust system located above rather than below the engine (the intake ports are located between the intake and exhaust camshafts). This facilitated in a much lower mounting height in their racing car, the C291 (and later C292). Unfortunately, the engine suffered from oil scavenging problems early on in its development, and although the problem was eventually solved, changes in the rules at the ACO in which the car was entered, effectively doomed the future prospects of what could otherwise have been a competitive engine.
Henry Meadows built a Flat-12 diesel engine in World War II for the British Covenanter tank.
|
||||||||||||||||||||
 |
This article does not cite any references or sources. (September 2007) Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed. |
