Bollard
From Wikipedia, the free encyclopedia
A bollard is a short vertical post typically found where large ships dock. While originally it only meant a post[1] used on a quay for mooring, the word now also describes a variety of structures to control or direct road traffic. The term may be related to bole, meaning the lower trunk of a tree.
Contents |
[edit] Mooring bollards
- See also: Mooring (watercraft)
A bollard, a name inherited from the Norman-French name Boulard still often found in Normandy, is a short wooden, iron or stone post used on a quayside for mooring ships. Mooring bollards are rarely totally cylindrical, but typically have a larger diameter near the top to discourage mooring warps (docklines) from coming loose. Single bollards will sometimes include a cross rod to allow the mooring to be bent into a figure eight.
[edit] Roads
Bollards are rigid posts that can be arranged in a line to close a road or path to vehicles above a certain width, and to separate traffic from pedestrians.[2]
Bollards can be mounted near enough to each other that they block ordinary cars, for instance, but wide enough to permit special-purpose vehicles through. Bollards can be used to enclose car-free zones: removable bollards allow access for service and emergency vehicles.
Tall (1.15 meter/4 foot) slim (10 cm/4 inch) fluorescent red or orange plastic bollards with reflective tape and removable heavy rubber bases are frequently used in road traffic control where traffic cones would be inappropriate due to their width and ease of movement. Also referred to as deliniators, the bases are usually made from recycled plastic, and can be easily glued to the road surface to resist movement following minor impacts from passing traffic. Sometimes called "T-Top Bollards" from the T-bar moulded into the top for tying tape, the bollard is an economical, cost effective and safe delineation system designed especially for motorways and busy arterial roads. In conjunction with plastic tape, it is also effective in pedestrian control.
The American Heritage Dictionary describes this use of Bollard as "chiefly British", although the term has crept into the jargon of some American universities where dense traffic necessitates the use of bollards for Access Control.
Bollards are frequently used to direct traffic around a traffic island. A recent development is the "rising bollard" - a bollard that can be lowered entirely below the road surface to enable traffic to pass, or raised to block traffic. Rising bollards are used to secure sensitive areas from attack, or to enforce traffic rules that are time related or restrict access to particular classes of traffic.
A "manually retractable bollard", however is lowered by a key mechanism. It is especially useful in a mixed-use public space which supports both pedestrian use and emergency and or service vehicle use.
The term "robotic bollards" has been applied to traffic barricades capable of moving themselves into position on a roadway. [3]
Permanent and retractable buried bollards are increasingly common around the world to hinder vehicle-based terrorist actions from achieving close proximity to buildings, and are also used to prevent Ram-raiding.
Bollards are also used as a form of permanent utility location.
[edit] Mountaineering
In mountaineering, a bollard is a large pile of snow or a block of ice shaped to form a secure anchor point. The size of a bollard anchor varies depending on the snow condition. Larger size is preferred for new snow which is soft and loose. While bollards can be quite strong, they are time consuming to build and not as commonly used as flukes, pickets, ice screws and Abalokov threads.
[edit] Other meanings
- The Bollard is also an online alternative news publication in Portland, Maine.
- USCGC Bollard is a US Coast Guard cutter operating in Long Island Sound and north to Narragansett Bay.
- Urban Park Bollard is a retractable bollard. A retractable bollard is a short post which can be lowered, either manually or automatically, into the ground when not needed. This flexible use creates opportunities for vehicular control as well as pedestrian accessibility in a mixed use public space. Manually retractable bollards are appropriate for new projects and especially for reconstruction projects since they do not require retrofitting into existing landscapes, nor any electrical hookups or hydraulic systems. Similar systems, using bollards that are hinged at ground level, and fold flat allowing vehicles to drive over them, can be deployed in similar circumstances.
- Decorative bollards are placed in Geelong, Victoria, Australia, to enhance the landscape as a form of outdoor public sculpture. Usually they are made of timber, minimally modified from the traditionally cylindrical, wooden, maritime bollard shape, but brightly painted to resemble human figures. Such figures - which may be historical or contemporary, particular or generic - are sited singly or in clusters along the waterfront and in other areas where people gather. Decorative bollards have become a well-known feature of the city of Geelong and reflect its history as a major Australian port.
[edit] Gallery
 A bollard blocking a path at Princeton University. |
 Traffic Control bollards separating the road from the worksite. |
 Internally illuminated traffic bollard used in Hong Kong |
 T-Top Bollard (on right) next to a large traffic cone. |
 Manually Retractable Bollard at Battery Park, NYC |
 Amsterdammertje, a typical steel bollard in Amsterdam |
 An old bollard in east London |
 A bollard in City of London Colours |
[edit] References
[edit] External links
