Balance wheel

From Wikipedia, the free encyclopedia

Balance wheel in a cheap 1950s alarm clock, the Apollo, by Lux Mfg. Co. showing the balance spring (1) and regulator (2).

The balance wheel is the timekeeping device used in mechanical watches and some clocks, analogous to the pendulum in a pendulum clock. It is a weighted wheel that rotates back and forth, being returned toward its center position by a spiral spring, the balance spring or hairspring. It is driven by the escapement, which transforms the rotating motion of the watch gear train into impulses delivered to the balance wheel. Each swing of the wheel (called a 'tick' or 'beat') allows the gear train to advance a set amount, moving the hands forward. The combination of the mass of the balance wheel and the elasticity of the spring keep the time between each oscillation or ‘tick’ very constant, accounting for its near universal use as the timekeeper in mechanical watches to the present. From its invention in the 14th century until quartz movements became available in the 1970s, virtually every portable timekeeping device used some form of balance wheel.

Perhaps the earliest existing drawing of a balance wheel, in Giovanni De Dondi's astronomical clock, built 1364, Padua, Italy. The balance wheel (crown shape, top) had a beat of 2 seconds. Tracing of an illustration from his 1364 clock treatise, Il Tractatus Astarii.

[edit] Origin

The balance wheel appeared with the first mechanical clocks, in 14th century Europe, but it seems unknown exactly when or where it was first used. It is an improved version of the foliot, a primitive inertial timekeeper consisting of a straight bar with weights on the ends. The first clocks in northern Europe used foliots, while those in southern Europe used balance wheels^[1]. As clocks were made smaller, first as table clocks and then as the first large watches after 1500, balance wheels began to be used in place of foliots^[2]. Since more of its weight is located on the rim away from the axis, a balance wheel could have a larger moment of inertia than a foliot of the same size, and keep better time. The wheel shape also had less air resistance, and its geometry partly compensated for thermal expansion error due to temperature changes^[3].

[edit] Addition of balance spring

Early balance wheel with spring in an 18th century French watch.

These early balance wheels were crude timekeepers because they lacked the other essential element: the balance spring. Early balance wheels rotated freely in each direction until the escapement pushed it back the other way. This made the timekeeping strongly dependent on the driving force, so the watch slowed down as the mainspring unwound.

A way forward opened when it was noticed that springy hog bristle curbs, added to limit the rotation of the wheel, increased its accuracy.^[4][5] Robert Hooke first applied a metal spring to the balance in 1658 and John Hautefeuille and Christian Huygens improved it to its present spiral form in 1674^[3][6] The addition of the spring made the balance wheel a harmonic oscillator, the basis of every modern clock, with a natural resonance frequency or ‘beat’ resistant to changes in the drive force or friction. This crucial innovation greatly increased the accuracy of watches, from several hours per day^[7] to perhaps 10 minutes per day^[8], changing them from expensive novelties into useful timekeepers.

[edit] Temperature error

After the spring was added, a major remaining source of inaccuracy was the effect of temperature changes. An increase in temperature made the spring and the balance get slightly longer from thermal expansion, but a more important effect was that the elasticity of the spring decreased. The weaker spring would take longer to return the balance wheel back toward the center, so the ‘beat’ would get slower and the watch would lose time. Ferdinand Berthoud found in 1773 that a brass balance and steel spring, subjected to a 60°F temperature increase, loses 393 seconds per day, of which 312 seconds is due to spring elasticity decrease^[9].

[edit] Temperature compensated balance wheels

The need for an accurate clock to determine longitude during sea voyages drove many advances in balance technology in 18th century Britain. Even a 1 second per day error in a marine chronometer could result in a 17 mile error in ship's position after a 2 month voyage. John Harrison was first to apply temperature compensation to a balance wheel in 1753, using a bimetallic ‘compensation curb’ on the spring, in the first successful marine chronometers, H4 and H5. These achieved an accuracy of a fraction of a second per day.^[8] The compensation curb was not further used because of its complexity.

Bimetallic temperature compensated balance wheel, from an early 1900s pocket watch. 17 mm dia. (1) Moving opposing pairs of weights closer to the ends of the arms increases temperature compensation. (2) Unscrewing pairs of weights near the spokes slows the oscillation rate. Adjusting a single weight changes the poise, or balance.

A simpler solution was devised around 1765 by Pierre Le Roy, and improved by John Arnold, and Thomas Earnshaw: the Earnshaw or compensating balance wheel^[10]. The key was to make the balance wheel change size with temperature. If the balance could be made to shrink in diameter as it got warmer, conservation of angular momentum would make it rotate faster, like a spinning ice skater that pulls in her arms. The faster balance would take less time to oscillate back and forth, compensating for the slowing caused by the weaker spring.

To accomplish this, the outer rim of the balance was made of a ‘sandwich’ of two metals; a layer of steel on the inside fused to a layer of brass on the outside. Strips of this bimetallic construction bend toward the steel side when they are warmed, because the thermal expansion of brass is greater than steel. The rim was cut open at two points next to the spokes of the wheel, so it resembled an S-shape (see figure) with two circular bimetallic ‘arms’. A temperature increase makes the arms bend inward toward the center of the wheel, and the shift of mass inward makes the balance spin faster, cancelling out the slowing due to the spring. The amount of compensation is adjusted by moveable weights on the arms. Marine chronometers with this type of balance had errors of only 3 - 4 seconds per day over a wide temperature range.^[11] By the 1870s compensated balances began to be used in watches.

[edit] Middle temperature error

Marine chronometer balance wheels from the mid 1800s, with various 'auxiliary compensation' systems to reduce middle temperature error.

The standard Earnshaw compensation balance dramatically reduced error due to temperature variations, but it didn't eliminate it. As first described by J. G. Ulrich, a compensated balance adjusted to keep correct time at a given low and high temperature will be a few seconds per day fast at intermediate temperatures.^[12] The reason is that the moment of inertia of the balance varies as the square of the radius of the compensation arms, and thus of the temperature. But the elasticity of the spring varies linearly with temperature.

To mitigate this problem, chronometer makers adopted various 'auxiliary compensation' schemes, which reduced error below 1 second per day. Most of the chronometers that came in first in the annual Greenwich Observatory trials between 1850 and 1914 were auxiliary compensation designs.^[13] Auxiliary compensation was never used in watches because of its complexity.

[edit] Better materials

Low temperature coefficient alloy balance and spring, in an ETA 1280 movement from a Benrus Co. watch made in the 1950s.

The bimetallic compensated balance wheel was made obsolete in the early 1900s by advances in metallurgy. Charles Edouard Guillaume won a Nobel prize for the 1899 invention of Invar, a nickel steel alloy with very low thermal expansion, and Elinvar (from El asticité invar iable) an alloy whose elasticity is unchanged over a wide temperature range, for balance springs.^[14] A solid Invar balance with a spring of Elinvar was largely unaffected by temperature, so it replaced the difficult-to-adjust bimetallic balance. This led to a series of improved low temperature coefficient alloys for balances and springs.

[edit] Modern balance wheels

Modern balance wheel (arrows), in a Chinese watch movement.

Until the 1980s balance wheels were used in chronometers, bank vault time locks, alarm clocks, kitchen timers, stopwatches, and time fuzes for bombs, but quartz technology has taken over these applications, and the main remaining use is in quality watches.

Modern (2007) watch balance wheels are usually made of Glucydur, an alloy of beryllium, copper and iron, with springs of alloys such as Nivarox.^[15] They are smooth, to reduce air friction. Instead of weight screws to adjust the poise, they are computer-poised at the factory, using a laser to burn a precise pit in the rim to make them balanced.^[16] Balances rotate about 1½ turns in each direction. The rate of the balance is adjusted with the regulator, a lever with a narrow slit on the end through which the balance spring passes. Moving the lever slides the slit up and down the balance spring, changing its effective length, and thus the resonant vibration rate of the balance. Since the regulator interferes with the spring’s action, some precision watches have ‘free sprung’ balances with no regulator, such as the Gyromax. ^[15]

A balance’s vibration rate is measured in beats (ticks) per hour, or BPH. The length of a beat is one swing of the balance wheel, between reversals of direction, so there are two beats in a complete cycle. Balances in precision watches are designed with faster beats, because they are less affected by motions of the wrist.^[17]s Watches made prior to the 1970s usually had a rate of 18,000 BPH (5 beats per second). Current watches have beats of 21,600, 28,800, and a few have 36,000 BPH (10 beats per second). During WW2, Elgin produced a very precise stopwatch that ran at 40 beats per second (144,000 BPH), earning it the nickname 'Jitterbug'.^[18]

The precision of the best balance wheel watches on the wrist is around a few seconds per day. The most accurate balance wheel timepieces made were marine chronometers, which by World War 2 had achieved accuracies of 0.1 second per day.^[19]

[edit] References

• "Marine Chronometer". Encyclopaedia Britannica online. (2007). Encyclopædia Britannica Inc.. Retrieved on 2007-06-15. 
• Britten, Frederick J. (1898). On the Springing and Adjusting of Watches. New York: Spon & Chamberlain. Retrieved on 2008-04-20. . Has detailed account of development of balance spring.
• Brearley, Harry C. (1919). Time Telling through the Ages. New York: Doubleday. Retrieved on 2008-04-16. .
• Glasgow, David (1885). Watch and Clock Making. London: Cassel & Co.. Retrieved on 2008-04-16. . Detailed section on balance temperature error and auxiliary compensation.
• Gould, Rupert T. (1923). The Marine Chronometer. Its History and Development. London: J. D. Potter, 176-177. ISBN 0-907462-05-7. 
• Headrick, Michael (2002). "Origin and Evolution of the Anchor Clock Escapement" 22 (2). . Good engineering overview of development of clock and watch escapements, focusing on sources of error.
• Milham, Willis I. (1945). Time and Timekeepers. New York: MacMillan. ISBN 0780800087. . Comprehensive 616p. book by astronomy professor, good account of origin of clock parts, but historical research dated. Long bibliography.
• Odets, Walt (2005). Balance Wheel Assembly. Glossary of Watch Parts. TimeZone Watch School. Retrieved on 2007-06-15.. Detailed illustrations of parts of a modern watch, on watch repair website
• Odets, Walt (2007). The Balance Wheel of a Watch. The Horologium. TimeZone.com. Retrieved on 2007-06-15.. Technical article on construction of watch balance wheels, starting with compensation balances, by a professional watchmaker, on watch repair website

[edit] External links

• Choi, Fred (2007-05-26). William Simcock Massey Type III pocket watch. YouTube. Retrieved on 2008-04-26. Video of antique mid-1800s watch showing the balance wheel turning]
• Costa, Alan (1998). The History of Watches. Atmos Man. Retrieved on 2007-06-19. History of watches, on commercial website.
• Oliver Mundy, The Watch Cabinet Pictures of a private collection of antique watches from 1710 to 1908, showing many different varieties of balance wheel.

[edit] Footnotes