A36 steel
From Wikipedia, the free encyclopedia
A36 steel is a standard steel alloy which is a common structural steel used in the United States.[1]
The A36 standard was established by the standards organization ASTM International.
Contents |
[edit] Properties
As with most steels, A36 has a density 7.8 times that of water. A36 steel in plates, bars, and shapes with a thickness of less than 8 inches (203 mm) has a minimum yield strength of 36 ksi (36,000 psi or 248 MPa), and ultimate tensile strength of 58-80 ksi (400-550 MPa). Plates thicker than 8 inches have 32 ksi yield strength and 58-80 ksi ultimate tensile strength.[1]
A36 is a standard carbon steel, without advanced alloying.
[edit] Usage
[edit] Fabricated forms
A36 is produced in a wide variety of forms, including:
- Plate
- Structural Shapes
- Pipe
- Bar
- Sheet
For more information, see Structural steel.
[edit] Methods of joining
A36 is readily welded by nearly all welding processes. The most commonly used for A36 are the cheapest and easiest - shielded metal arc welding, (SMAW) (otherwise known as stick welding), gas metal arc welding (otherwise known as MIG welding for Metal Inert Gas), and oxyacetylene welding for non-electric methods.
A36 steel is also commonly bolted and riveted in structural applications.
[edit] References
- ^ a b Steel Construction Manual, 8th Edition, second revised edition, American Institute of Steel Construction, 1986, ch. 1 page 1-5