Deglazing

From Wikipedia, the free encyclopedia

Deglazing is a term used in more than one context.

Contents 1 Cooking 2 Mechanical 3 General 4 Notes 5 Further reading

[edit] Cooking

When a piece of meat is roasted, pan fried or prepared in a pan with another form of dry heat, a fond, or deposit is left at the bottom of the pan with any rendered fat. Usually, the meat is removed from the cooking vessel, the majority of the oil is poured off, leaving a small amount with the dried and caramelized meat juices. The pan is returned to the heat, and a liquid is added to act as a solvent. This liquid can be plain water, vegetable or meat stock, a spirit, some wine, verjuice or any other liquid. This allows the cook to scrape the dark spots from the bottom of the pan, and dissolve them creating a rich sauce. ^[1]

This method is the cornerstone of many well known sauces and gravies. The resulting liquid can be seasoned and served on its own (sometimes called a jus), or with the addition of aromatic vegetables such as onions or shallots. The sauce can also be thickened with a starch such as flour, cornstarch, or arrowroot, or reduced with a steady heat forming a richer concentrated sauce.

[edit] Mechanical

In a gasoline or diesel engine, the pistons ride up and down within the engine maintaining a tight seal via the piston rings. Over time, the constant rubbing of the rings against the cylinder wall can polish it to a very smooth finish. This creates problems in two ways. First, the lubricating oil in the engine will not adhere properly to the mirror smooth surface, and friction is increased. Secondly, while breaking in newly installed piston rings, a minute amount of wear must occur between rings and cylinder wall in order to seat the rings properly, and ensure a gas-tight seal. If the cylinder walls are too smooth, this wear will not occur, with the rings "skating" over the polished surface.

In order to correct the situation, a mechanic can take the engine apart, and deglaze the cylinders, usually using an abrasive. This creates a roughly 45 degree angle crosshatching of tiny grooves in the cylinder wall, and restores the engines performance.

[edit] General

In most other uses, "deglazing" refers to the removal of any shiny or smooth surface (as in a glazed finish on pottery). A surface that has been made dull is called "deglazed".

[edit] Notes

[edit] Further reading

Deglazing: It works like magic, Leslie Brenner - Los Angeles Times

This article does not cite any references or sources. (August 2007) Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed.