Car alarm
From Wikipedia, the free encyclopedia
 |
This article may require cleanup to meet Wikipedia's quality standards. Please improve this article if you can. (May 2007) |
This article is about the electronic device. For the TV programme episode, see Car Alarm (TV Episode).
A car alarm is an electronic device installed in a vehicle in an attempt to discourage theft of the vehicle itself, its contents, or both. Car alarms work by emitting high-volume sound (usually a siren, klaxon, pre-recorded verbal warning, the vehicle's own horn, or a combination thereof) when the conditions necessary for triggering are met, as well as by flashing some of the vehicle's lights, and (optionally) notifying the car's owner via a paging system and interrupting various electrical circuits necessary for the car to start.
Car alarms should not be confused with immobilizers; although the purpose of both may be to deter car theft, they operate in a dissimilar fashion. An immobilizer generally will not offer any audible or visual theft deterrence, nor require any additional input from the driver than a non-immobilizer car.
Car alarms can be divided into 2 categories:
- OEM (built-in to the vehicle at the factory)
- Aftermarket (installed at any time after the car has been built, such as by the new car dealer, an auto accessories store, or the vehicle's owner)
Contents |
[edit] Arming and disarming of car alarms
[edit] OEM alarms
Almost all OEM alarms are typically armed and disarmed with the vehicle's keyless entry remote. On many vehicles the key cylinders in the driver or front passenger door activate switches, so that when a key is used in the door the alarm will arm or disarm. Some vehicles will arm when the power door lock switch is pressed with the driver's door open, and the door is subsequently closed. Some vehicles will disarm if the ignition is turned on; often when the vehicle is equipped with a key-based immobilizer and an alarm, the combination of the valid key code and the ignition disarms the system.
[edit] Aftermarket alarms
Like OEM alarms, aftermarket systems are usually armed and disarmed via remote. Usually they do not have provisions for external disarming from the key cylinder, but will typically have an override switch mounted in a hidden location.
[edit] What sets an alarm off?
The individual triggers for a car alarm vary widely, depending on the make and model of the vehicle, and the brand and model of the alarm itself(for aftermarket alarms). Since aftermarket alarms are designed to be universal(i.e., compatible with all 12 volt negative ground electrical systems as opposed to one carmaker's vehicles), these commonly have trigger inputs that the installer/vehicle owner chooses not to connect, which additionally determines what will set the alarm off.
[edit] OEM alarm triggers
Generally, OEM alarms monitor the doors and trunk/hatch for unauthorized entry. On some vehicles this is done through pin switches, mercury switches, or microswitches integrated into the latch. On others, the doorlock mechanisms have switches built into them. Some OEM alarms additionally will trigger if the hood is opened, or if the ignition is turned on. Additionally a few systems have a shock sensor which will trigger upon a significant impact to the vehicle's body.
[edit] Aftermarket alarm triggers
The simplest aftermarket alarms are one-piece units with a siren and control module. Such a unit will typically contain a shock sensor and two wires (12 volt constant power and ground) which are connected to the car's battery. This type of alarm is triggered by vibration transferred to the shock sensor, or by voltage changes on the input (the alarm assumes that a sudden change in voltage is due to a door or trunk being opened, or the ignition being turned on); however it is very prone to false triggers on a late-model vehicle with many electronic control modules, which can draw current with the car off. For this last reason these alarms are increasingly becoming obsolete.
More sophisticated aftermarket alarms are wired in to the vehicle's circuits individually. Typically, these alarms have inputs for power and ground, as well as for positive- and negative-switched door open circuits, negative trunk and/or hood circuits, and ignition-switched circuits to detect the vehicle being turned on; aftermarket alarms also usually have a shock sensor which may be built into the control module or external to it.
In addition, some aftermarket alarms have provisions for optional sensors which can sense the vehicle being tilted(this alerts against unauthorized towing) , glass breakage(which can sometimes be done without an impact sufficient to trigger the shock sensor), or motion inside or immediately outside the vehicle(this is a concern on convertibles).
The sensors mentioned here are usually adjustable to in order to avoid false alarms - for example a shock sensor will sometimes vibrate due to a loud noise in the area, or an accidental bump to the car from a passerby. This can cause the alarm to falsely sense an attempted break-in.
Some alarms will bypass some or all of the inputs at times by design. For example, Directed Electronics alarms have a feature called "Nuisance Prevention Circuitry" which ignores any input which has triggered 3 times within 1 hour, unless the car owner turns the ignition on to reset it. Other alarms can bypass some of their inputs via a button combination on the remote, or when remote starting(if the alarm supports this feature).
[edit] Effectiveness of car alarms
Since many car alarms are triggered accidentally, most people in American cities are numbed to the sound of alarms, and do nothing to prevent theft. The New York City Police Department claims that car alarms are actually making the crime problem worse (see their booklet called "Police Strategy No. 5: Reclaiming the Public Spaces of New York," City of New York, New York, 1994) because nothing is done about the alarms, the general impression is that no one cares about the neighborhood.[citation needed]
Because of the large number of false alarms with car alarms, many vehicle manufacturers no longer factory fit simple noise-making alarms, instead offering silent—but effective—immobilizers.[citation needed] Alternatively, an aftermarket vehicle tracking system can enable the police to trace stolen vehicles. Most police tracking systems require the user to pay a recurring fee, whereas factory immobilizers are included in the purchase price of the vehicle. GPS locating systems enable the owner of the vehicle to lock and unlock, track, and disable the starter of the vehicle online. Other additional options allow the user to receive messages if the alarm is set off or if the vehicle breaches a specified speed or boundary. GPS systems are usually not paid monthly but locates are purchased. Both classes of devices deter someone from taking the vehicle without consent but do not cover them from theft, or vandalism of, the vehicle.
Yet another class of security covers aftermarket car alarms that include 2-way paging controllers. Two-way pagers have remote control functions built-in, allowing the user to arm and disarm the alarm while informing the user of threats made to the vehicle. Some 2-way systems have an LCD icon display that can pinpoint the actual part of the vehicle being threatened. Many two-way pagers can also alert the user with beeps or silent vibration.
[edit] See also
|
||||||||||||||||||||||||||||||||||||||||||||||||||
==External links
