Biological neuron model

From Wikipedia, the free encyclopedia

A biological neuron model is a mathematical description of the properties of nerve cells, or neurons, that is designed to accurately describe and predict biological processes. This is in contrast to the artificial neuron, which aims for computational effectiveness, although these goals sometimes overlap.

1 Artificial neuron abstraction
2 Biological abstraction
3 Expanded neuron models
4 References

[edit] Artificial neuron abstraction

The most basic model of a neuron consists of an input with some synaptic weight vector and an activation function or transfer function inside the neuron determining output. This is the basic structure used in artificial neurons, which in a neural network often looks like

$y_j = \phi\left( \sum_i w_{ij} x_i \right)$

where $y j$ is the output of the $j$ th neuron, $x i$ is the $i$ th input neuron signal, $w$ is the synaptic weight, and $φ$ is the activation function. Some of the earliest biological models took this form until kinetic models such as the Hodgkin-Huxley model became dominant.

[edit] Biological abstraction

In the case of modelling a biological neuron, physical analogues are used in place of abstractions such as "weight" and "transfer function". The input to a neuron is often described by an ion current through the cell membrane that occurs when neurotransmitters cause an activation of ion channels in the cell. We describe this by a physical time-dependent current $I (t)$ . The cell itself is bound by an insulating cell membrane with a concentration of charged ions on either side that determines a capacitance $C m$ . Finally, a neuron responds to such a signal with a change in voltage, or an electrical potential energy difference between the cell and its surroundings, which is observed to sometimes result in a voltage spike called an action potential. This quantity, then, is the quantity of interest and is given by $V m$ .

[edit] Integrate-and-fire

One of the earliest models of a neuron was first investigated in 1907 by Lapicque^[1]. A neuron is represented in time by

$I(t)=C_m \frac{d V_m}{d t}$

which is just the time derivative of the law of capacitance, $Q = C V$ . When an input current is applied, the membrane voltage increases with time until it reaches a constant threshold $V t h$ , at which point a delta function spike occurs and the voltage is reset to its resting potential, after which the model continues to run. The firing frequency of the model thus increases linearly without bound as input current increases.

The model can be made more accurate by introducing a refractory period $t r e f$ that limits the firing frequency of a neuron by preventing it from firing during that period. Through some calculus involving a Fourier transform, the firing frequency as a function of a constant input current thus looks like

$\,\! f(I)=I/(C_m V_{th} + t_{ref} I)$ .

This model still has a glaring problem in that it has no time-dependent memory. If it receives a below-input signal one day, it will retain that voltage boost forever until it fires again, something that is clearly not reflected in experiment and not consistent in theory.

[edit] Leaky integrate-and-fire

In the leaky integrate-and-fire model, the memory problem is solved by adding a "leak" term to the membrane potential, reflecting the diffusion of ions that occurs through the membrane when some equilibrium is not reached in the cell. The model looks like

$I(t)-\frac{V_m (t)}{R_m} = C_m \frac{d V_m (t)}{d t}$

where $R m$ is the membrane resistance, as we find it is not a perfect insulator as assumed previously. This forces the input current to exceed some threshold $I t h = V t h / R m$ in order to cause the cell to fire, else it will simply leak out any change in potential. The firing frequency thus looks like

$f(I) = \begin{cases} 0, & I \le I_{th} \\ \left(t_{ref}-R_m C_m \log(1-\tfrac{V_{th}}{I R_m})\right)^{-1}, & I > I_{th} \end{cases}$

which converges for large input currents to the previous leak-free model with refractory period^[2].

[edit] Hodgkin-Huxley

Main article: Hodgkin-Huxley model

The most successful and widely-used models of neurons have been based on the Markov kinetic model developed from Hodgkin and Huxley's 1952 work based on data from the squid giant axon. We note as before our voltage-current relationship, this time generalized to include multiple voltage-dependent currents:

$C_m \frac{d V(t)}{d t} = -\sum_i I_i (t, V)$ .

Each current is given by Ohm's Law as

$I(t,V) = g(t,V)\cdot(V-V_{eq})$

where $g (t, V)$ is the conductance, or inverse resistance, which can be expanded in terms of its constant average $\bar{g}$ and the activation and inactivation fractions $m$ and $h$ , respectively, that determine how many ions can flow through available membrane channels. This expansion is given by

$g(t,V)=\bar{g}\cdot m(t,V)^p \cdot h(t,V)^q$

and our fractions follow the first-order kinetics

$\frac{d m(t,V)}{d t} = \frac{m_\infty(V)-m(t,V)}{\tau_m (V)} = \alpha_m (V)\cdot(1-m) + \beta_m (V)\cdot m$

with similar dynamics for $h$ , where we can use either $τ$ and $m_\infty$ or $α$ and $β$ to define our gate fractions.

With such a form, all that remains is to individually investigate each current one wants to include. Typically, these include inward Ca²⁺ and Na⁺ input currents and several varieties of K⁺ outward currents, including a "leak" current. The end result can be at the small end 20 parameters which one must estimate or measure for an accurate model, and for complex systems of neurons not easily tractable by computer. Careful simplifications of the Hodgkin-Huxley model are therefore needed.

[edit] FitzHugh-Nagumo

Main article: FitzHugh-Nagumo model

Sweeping simplifications to Hodgkin-Huxley were introduced by FitzHugh and Nagumo in 1961 and 1962. Seeking to describe "regenerative self-excitation" by a nonlinear positive-feedback membrane voltage and recovery by a linear negative-feedback gate voltage, they developed the model described by

$\frac{d V}{d t}=V-V^3 - w + I_{\rm ext}$

$\tau \frac{d w}{d t} = V-a-b w$

where we again have a membrane-like voltage and input current with a slower general gate voltage $w$ and experimentally-determined parameters $a = - 0.7, b = 0.8,τ = 1 / 0.08$ . Although not clearly derivable from biology, the model allows for a simplified, immediately available dynamic without being a trivial simplification^[3].

[edit] Morris-Lecar

In 1981 Morris and Lecar combined Hodgkin-Huxley and FitzHugh-Nagumo into a voltage-gated calcium channel model with a delayed-rectifier potassium channel, represented by

$\begin{array}{rcl} C\frac{d V}{d t} & = & -I_{ion}(V,w) + I \\ \frac{d w}{d t} & = & \phi\frac{w_\infty(V) - w}{\tau_w(V)} \end{array}$ ,

where $I_{ion}(V,w) = \bar{g}_{Ca} m_\infty(V)(V-V_{Ca}) + \bar{g}_{K} w(V-V_{K}) + \bar{g}_{L}(V-V_{L})$ .^[2]

[edit] Expanded neuron models

While the success of integrating and kinetic models is undisputed, much has to be determined experimentally before accurate predictions can be made. The theory of neuron integration and firing (response to inputs) is therefore expanded by accounting for the nonideal conditions of cell structure.

[edit] Cable theory

See also: Cable theory

The neuron given in standard circuit models can be considered a literal spherical cow, in that it is a simplified model that describes a uniform, spherical neuron. Cable theory describes the dendritic arbor as a cylindrical structure undergoing a regular pattern of bifurcation, like branches in a tree. For a single cylinder or an entire tree, the input conductance at the base (where the tree meets the cell body, or any such boundary) is defined as

$G_in = \frac{G_\infty \tanh(L) + G_L}{1+(G_L / G_\infty )\tanh(L)}$ ,

where $L$ is the electrotonic length of the cylinder which depends on its length, diameter, and resistance. A simple recursive algorithm scales linearly with the number of branches and can be used to calculate the effective conductance of the tree. This is given by

$\,\! G_D = G_m A_D \tanh(L_D) / L_D$

where $A D = π l d$ is the total surface area of the tree of total length $l$ , and $L D$ is its total electrotonic length. For an entire neuron in which the cell body conductance is $G S$ and the membrane conductance per unit area is $G m d = G m / A$ , we find the total neuron conductance $G N$ for $n$ dendrite trees by adding up all tree and soma conductances, given by

$G_N = G_S + \sum_{j=1}^n A_{D_j} F_{dga_j}$ ,

where we can find the general correction factor $F d g a$ experimentally by noting $G D = G m d A D F d g a$ .

[edit] Compartmental models

See also: Multi-compartment model

The cable model makes a number of simplifications to give closed analytic results, namely that the dendritic arbor must branch in diminishing pairs in a fixed pattern. A compartmental model allows for any desired tree topology with arbitrary branches and lengths, but makes simplifications in the interactions between branches to compensate. Thus, the two models give complementary results, neither of which is necessarily more accurate.

Each individual piece, or compartment, of a dendrite is modeled by a straight cylinder of arbitrary length $l$ and diameter $d$ which connects with fixed resistance to any number of branching cylinders. We define the conductance ratio of the $i$ th cylinder as $B_i = G_i / G_\infty$ , where $G_\infty=\tfrac{\pi d^{3/2}}{2\sqrt{R_i R_m}}$ and $R i$ is the resistance between the current compartment and the next. We obtain a series of equations for conductance ratios in and out of a compartment by making corrections to the normal dynamic $B o u t, i = B i n, i + 1$ , as

$B_{out,i} = \frac{B_{in,i+1}(d_{i+1}/d_i)^{3/2}}{\sqrt{R_{m,i+1}/R_{m,i}}}$
$B_{in,i} = \frac{B_{out,i} + \tanh X_i}{1+B_{out,i}\tanh X_i}$
$B_{out,par} = \frac{B_{in,dau1} (d_{dau1}/d_{par})^{3/2}} {\sqrt{R_{m,dau1}/R_{m,par}}} + \frac{B_{in,dau2} (d_{dau2}/d_{par})^{3/2}} {\sqrt{R_{m,dau2}/R_{m,par}}} + \ldots$

where the last equation deals with parents and daughters at branches, and $X_i = \tfrac{l_i \sqrt{4R_i}}{\sqrt{d_i R_m}}$ . We can iterate these equations through the tree until we get the point where the dendrites connect to the cell body (soma), where the conductance ratio is $B i n, s t e m$ . Then our total neuron conductance is given by

$G_N = \frac{A_{soma}}{R_{m,soma}} + \sum_j B_{in,stem_j} G_{\infty_j}$ .

[edit] Synaptic transmission

See also: Neurotransmission

The response of a neuron to individual neurotransmitters can be modeled as an extension of the classical Hodgkin-Huxley model with both standard and nonstandard kinetic currents. Four neurotransmitters have primarily influence in the CNS. AMPA/kainate receptors are fast excitatory mediators while NMDA receptors mediate considerably slower currents. Fast inhibitory currents go through GABA_A receptors, while GABA_B receptors mediate by secondary $G$ -protein-activated potassium channels. This range of mediation produces the following current dynamics:

$I_{AMPA}(t,V) = \bar{g}_{AMPA}[O](V(t)-E_{AMPA})$
$I_{NMDA}(t,V) = \bar{g}_{NMDA}B(V)[O](V(t)-E_{NMDA})$
$I_{GABA_A}(t,V) = \bar{g}_{GABA_A}([O_1]+[O_2])(V(t)-E_{Cl})$
$I_{GABA_B}(t,V) = \bar{g}_{GABA_B} \tfrac{[G]^n} {[G]^n+K_d} (V(t)-E_{K})$ .

As before, $\bar{g}$ is the average conductance (around 1S) and $E$ is the equilibrium potential of the given ion or transmitter (AMDA, NMDA, Cl, or K), while $[O]$ describes the fraction of receptors that are open. For NMDA, there is a significant effect of magnesium block that depends sigmoidally on the concentration of intracellular magnesium by $B (V)$ . For GABA_B, $[G]$ is the concentration of the $G$ -protein, and $K d$ describes the dissociation of $G$ in binding to the potassium gates.

The dynamics of this more complicated model have been well-studied experimentally and produce important results in terms of very quick synaptic potentiation and depression, that is, fast, short-term learning.

[edit] Other conditions

The models above are still idealizations. Corrections must be made for the increased membrane surface area given by numerous dendritic spines, temperatures significantly hotter than room-temperature experimental data, and nonuniformity in the cell's internal structure^[2]. Many problems in the temperature and geometry dynamics of the cell during action potential propagation, as well as problems in explaining some pharmacology, are still unsolved, some of which have required unorthodox new models, such as the soliton model, to explain.

[edit] References

^ Abbott, L.F. (1999). "Lapique's introduction of the integrate-and-fire model neuron (1907)". Brain Research Bulletin 50 (5/6): 303-304.
^ ^a ^b ^c Koch, Christof; Idan Segev (1998). Methods in Neuronal Modeling, 2, Cambridge, MA: Massachusetts Institute of Technology. ISBN 0-262-11231-0.
^ Izhikevich, Eugene M.; Richard FitzHugh. FitzHugh-Nagumo Model. Scholarpedia. Retrieved on 2007-11-25.

Categories: Neuroscience | Biophysics | Computational neuroscience

See also ebooksgratis.com: no banners, no cookies, totally FREE.