Apochromat
From Wikipedia, the free encyclopedia
An apochromat, or apochromatic lens (apo), is a photographic or other lens that has better color correction than the much more common achromat lenses. Chromatic aberration is the phenomenon of different colors focusing at different distances from a lens. In photography, it produces soft overall images, and color fringing at high-contrast edges, like an edge between black and white. Astronomers face similar problems, particularly with telescopes that use lenses rather than mirrors. Achromatic lenses are corrected to bring two wavelengths (typically red and blue) into focus in the same plane. Apochromatic lenses are designed to bring three wavelengths (typically red, green, and blue) into focus in the same plane.[1] The residual color error (secondary spectrum) can be up to an order of magnitude less than for an achromatic lens of equivalent aperture and focal length. Apochromats are also corrected for spherical aberration at two wavelengths, rather than one as in an achromat.
Astronomical objectives for wide-band digital imaging must have apochromatic correction, as the optical sensitivity of typical CCD imaging arrays can extend from the ultraviolet through the visible spectrum and into the near infrared wavelength range. Apochromatic lenses for astrophotography in the 60-150 mm aperture range have been developed and marketed by several different firms, with focal ratios ranging from f/5 to f/7. Focused and guided properly during the exposure, these apochromatic objectives are capable of producing the sharpest wide-field astrophotographs optically possible for the given aperture sizes.
Graphic arts process (copy) cameras generally use APO lenses for sharpest possible imagery as well. Classically-designed apochromatic process camera lenses generally have a maximum aperture limited to about f/9. More recently, higher-speed APO lenses have been produced for medium format, digital and 35 mm cameras.
Apochromatic designs require optical glasses with special dispersive properties to achieve three color crossings. This is usually achieved using costly fluoro-crown glasses, abnormal flint glasses, and even optically transparent liquids with highly unusual dispersive properties in the thin spaces between glass elements. The temperature dependence of glass and liquid index of refraction and dispersion must be accounted for during apochromat design to assure good optical performance over reasonable temperature ranges with only slight re-focusing. In some cases, apochromatic designs without anomalous dispersion glasses are possible.
