Alenia Aermacchi
From Wikipedia, the free encyclopedia
| Alenia Aermacchi s.p.a. | |
|---|---|
| Type | |
| Founded | 1913 |
| Headquarters | Varese |
| Key people | Giorgio Brazzelli (Chairman), Carmelo Cosentino (CEO), Massimo Lucchesini (General Manager) |
| Industry | Aerospace |
| Parent | Finmeccanica |
| Website | aermacchi.it |
Alenia Aermacchi is a leading company in the design and production of trainers for military pilots. Alenia Aermacchi is able to offer a wide range of products that meet the requirements of all training phases: primary, basic and lead-in fighter.
Contents |
[edit] Profile
Alenia Aermacchi has thus far sold about 2,000 trainers to more than 40 countries and has collaborated in major international military programs. The experience gained in the military sector has also allowed the company to extend its business to the civil aviation field, which currently accounts for 35% of its turnover.
In July 2003, Alenia Aermacchi was integrated into the Finmeccanica Group, which increased its shareholding to 99%. The company's facilities are located at Venegono Superiore (Varese province). Its workforce totals about 1800 and plants occupy a total area of approximately 274,000 m². Facilities include laboratories and workshops for structural tests and a wind and a water tunnel in addition to an airfield for flight test activities.
Alenia Aermacchi has always designed and developed its aircraft autonomously thanks to its highly qualified personnel and cutting edge technologies. Since its foundation, the company has constantly expanded and enhanced its activities to rank high in the following sectors; military trainers, military programs and civil programs.
[edit] Military trainers
Since the beginning, the design and production of military trainers have been Alenia Aermacchi's core business.
The wide range of products include:
- SF-260, a piston-engined or turboprop-powered screener/primary trainer
- MB-326, a turbofan engined trainer and light attack aircraft
- M-311, a basic turbofan trainer
- MB-339CD, an advanced and lead-in fighter trainer
- M-346, an advanced and lead-in fighter trainer of the new generation
[edit] Military collaboration
Alenia Aermacchi's skill in the design and manufacture of trainers has allowed the company to cooperate in a number of international military programs:
- AMX Program
Alenia Aermacchi takes part in the AMX program with Alenia Aeronautica and Embraer of Brazil with a total share of 24%. Alenia Aermacchi develops and manufactures the fuselage forward and rear sections and installs some avionic equipment in the aircraft. A Mid-Life Updating program is required by the Italian Air Force to upgrade the aircraft capabilities.
- Panavia Tornado program
For Panavia Tornado, Alenia Aermacchi designs and produces wing pylons and wing tips, roots, trailing edges and flaps, which represent a 5% share in the overall program.
- Eurofighter program
In the Eurofighter program, Alenia Aermacchi has a share exceeding 4% in, for the design and development of wing pylons, twin missile and twin store carriers, ECM pods, carbon fiber structures and titanium engine cowlings.
- C-27J program
After participating in the G-222 transport aircraft program, the company is currently involved in the new Military Transport Aircraft C-27J Spartan, for the production of outer wings.
[edit] Civil programs
Since the mid-1990s, Alenia Aermacchi has participated in various programs concerning the supply of engine nacelles for civil aircraft. Its design and technological capabilities have permitted the company to produce cold parts for engine nacelles: inlets, fan cowls and EBU, the systems-to-engine interface.
In 1999, Alenia Aermacchi established a joint venture (MHD) with Hurel-Dubois (presently Hurel-Hispano, of SNECMA group), a French company specialized in the development and manufacture of thrust reversers, to obtain the full responsibility for the development of nacelles installed on max. 100-seat aircraft.
[edit] Aermacchi aircraft
[edit] Macchi's initial designs
Racing seaplanes competing for the Schneider Trophy
- Macchi M.33
- Macchi M.39
- Macchi M.52
- Macchi M.C.72
[edit] During World War II
[edit] Postwar products
- Aermacchi AM.3
- Aermacchi AL-60
- Aermacchi MB-326
- Aermacchi MB-335
- Aermacchi MB-338
- Aermacchi MB-340
- Aermacchi S-211
[edit] Current Models
[edit] Motorcycle history
Soon after World War II had ended it was decided to start peacetime production with a three-wheeler truck. This was an unorthodox but very good design. Then, anticipating the motor cycle boom and intending to have a stake in it, the Aermacchi chiefs looked for a good designer who could produce an attractive lightweight. Their choice was Lino Tonti, who had been at Benelli and had worked on aircraft engines during the war. Tonti designed a 50 cc motorcycle that broke the land speed record for the displacement.
The bikes produced by Aermacchi were quite successful in the postwar Italian market, also thanks to their repeated placements on the race tracks. The firm designed and produced models incorporating the Italian word "Ala" (wing) in its names, such as "Ala Verde", "Ala Blu" and "Ala d'Oro" (respectively "green wing", "blue wing" and "golden wing").
In the 1960s, 50% of Aermacchi stock was acquired by Harley-Davidson to produce, in its assembly plant at Schiranna (near Varese), several models of small bikes (with engine displacement between 125cc and 350cc) for the American and the European market. This was an attempt to take back market sectors that were at the time increasingly being taken by Japanese manufacturers such as Honda and Yamaha. Aermacchi went on to have success in the Grand Prix motorcycle racing world with rider Renzo Pasolini finishing 2nd in the 1972 250 cc Roadracing World Championship. After 1974, when the American manufacturer acquired complete control of the Italian company, Aermacchi bikes re-badged as Harley-Davidsons won the 250 cc Roadracing World Championship three years in a row in 1974, 1975 and 1976. They also won the 350 cc World Championship in 1976. Upon the acquisition of Harley-Davidson by AMF in 1978, the Italian operations of the firm were sold to the Castiglioni brothers, founders of the Cagiva motorcycle company, which continued to produce bikes branded "HD Cagiva" until 1980.
[edit] External links
|
||||||||||||||
