Phoenix (spacecraft)

From Wikipedia, the free encyclopedia

Phoenix Mars Mission

Artist's impression of the Phoenix spacecraft as it lands on Mars
Organization NASA
Major contractors Lockheed Martin
Mission type Lander
Launch date August 4, 2007
Launch vehicle Delta II 7925
Mission duration 90 sols, 92.46 days
Decay May 25, 2008 (2008-05-25); 16 days ago
(soft landing on Mars)
NSSDC ID 2007-034A
Webpage http://phoenix.lpl.arizona.edu/
Mass 350 kg

Phoenix is a robotic spacecraft on a space exploration mission on Mars under the Mars Scout Program. The scientists conducting the mission will use instruments aboard the Phoenix lander to search for environments suitable for microbial life on Mars, and to research the history of water there. The multi-agency program is headed by the Lunar and Planetary Laboratory at the University of Arizona, under the direction of NASA's Jet Propulsion Laboratory. The program is a partnership of universities in the United States, Canada, Switzerland, the Philippines, Denmark, Germany, the United Kingdom, NASA, the Canadian Space Agency, the Finnish Meteorological Institute, Lockheed Martin Space Systems, and other aerospace companies.[1]

Phoenix is the sixth successful landing on Mars, out of twelve total international attempts (the sixth successful landing of seven American attempts). It is the third successful static lander and the first since Viking 2, and as of 2008 the most recent spacecraft to land successfully on Mars. It is also the first successful landing on a polar region of Mars.

Contents

[edit] Program overview

A labeled look at NASA's Mars Phoenix Lander.
A labeled look at NASA's Mars Phoenix Lander.

The mission has two goals. One is to study the geologic history of water, the key to unlocking the story of past climate change. The second is to search for evidence of a habitable zone that may exist in the ice-soil boundary, the "biological paydirt." Phoenix's instruments are suitable for uncovering information on the geological and possibly biological history of the Martian Arctic. Phoenix will be the first mission to return data from either of the poles, and will contribute to NASA's main strategy for Mars exploration, "Follow the water."

The primary mission is anticipated to last 90 sols (Martian days) – just over 92 Earth days. Researchers are hoping that the lander will survive into the Martian winter so that it can witness polar ice developing at the spacecraft's exploration area. As much as three feet of solid carbon dioxide ice could appear in the area. Even if it does survive part way into the winter, it is very unlikely that the lander will function throughout the entire winter due to the intense cold.[2] The mission was chosen to be a fixed lander rather than a rover because:[3]

  1. costs were reduced through reuse of earlier equipment;
  2. the area of Mars where Phoenix is landing is thought to be relatively uniform and thus traveling is of less value; and
  3. the equipment weight that would be required to allow Phoenix to travel can instead be dedicated to more and better scientific instruments.

[edit] History of the program

Phoenix during testing in September 2006
Phoenix during testing in September 2006
A comparison of sizes for the Sojourner rover, the Mars Exploration Rovers, the Phoenix lander and the Mars Science Laboratory.
A comparison of sizes for the Sojourner rover, the Mars Exploration Rovers, the Phoenix lander and the Mars Science Laboratory.

In August 2003 NASA selected the University of Arizona "Phoenix" mission for launch in 2007 as what was hoped would be the first in a new line of smaller, low-cost, Scout missions in the agency's exploration of Mars program.[4] The selection was the result of an intense two-year competition with proposals from other institutions. The $325 million NASA award is more than six times larger than any other single research grant in University of Arizona history.

Peter H. Smith of the University of Arizona Lunar and Planetary Laboratory, as Principal Investigator, along with 24 Co-Investigators, were selected to lead the mission. The mission was named after the Phoenix, a mythological bird that is repeatedly reborn from its own ashes. The Phoenix spacecraft contains several previously built components. The lander used for the 2007-08 mission is the modified Mars Surveyor 2001 Lander (canceled in 2000), along with several of the instruments from both that and the previous unsuccessful Mars Polar Lander mission. Lockheed Martin, which built the lander, had kept the nearly complete lander in an environmentally controlled clean room from 2001 until the mission was funded by the NASA Scout Program.[5]

Phoenix is a partnership of universities, NASA centers, and the aerospace industry. The science instruments and operations will be a University of Arizona responsibility. NASA's Jet Propulsion Laboratory in Pasadena, California, will manage the project and provide mission design and control. Lockheed Martin Space Systems, Denver, Colorado, built and tested the spacecraft. The Canadian Space Agency will provide a meteorological station, including an innovative Laser-based atmospheric sensor. The co-investigator institutions include Malin Space Science Systems (California), Max Planck Institute for Solar System Research (Germany), NASA Ames Research Center (California), NASA Johnson Space Center (Texas), De La Salle University (Philippines), Optech Incorporated, SETI Institute, Texas A&M University, Tufts University, University of Colorado, University of Copenhagen (Denmark), University of Michigan, University of Neuchâtel (Switzerland), University of Texas at Dallas, University of Washington, Washington University in St. Louis, and York University (Canada). Scientists from Imperial College London and Bristol University have provided hardware for the mission and will be part of the team operating the microscope station.[6]

On June 2, 2005, following a critical review of the project's planning progress and preliminary design, NASA approved the mission to proceed as planned.[7] The purpose of the review was to confirm NASA's confidence in the mission.

[edit] Launch

Phoenix is launched atop a Delta II 7925 rocket
Phoenix is launched atop a Delta II 7925 rocket
Noctilucent cloud created from the launch vehicle's exhaust gas.
Noctilucent cloud created from the launch vehicle's exhaust gas.

Phoenix was launched on 4 August 2007, at 5:26:34 am EDT (09:26:34 UTC) on a Delta 7925 launch vehicle from Pad 17-A of the Cape Canaveral Air Force Station. The launch was nominal with no significant anomalies. The Phoenix lander was placed on a trajectory of such precision that its first trajectory course correction burn, performed on 10 August 2007 at 7:30 a.m. EDT (11:30 UTC), was only 18 m/s. The launch took place during a launch window extending from 3 August 2007 to 24 August 2007. Due to the small launch window the rescheduled launch of the Dawn mission (originally planned for 7 July) had to stand down and was launched after Phoenix in September. The Delta 7925 was chosen due to its successful launch history, which includes launches of the Spirit and Opportunity Mars Exploration Rovers in 2003 and Mars Pathfinder in 1996.[8]

A noctilucent cloud[9] was created by the exhaust gas from the Delta II 7925 rocket used to launch Phoenix. The cloud took on not only the appearance of the mythical phoenix bird, but also the red and blue colors of the Phoenix Mars Lander logo. The colors in the cloud formed from the prism-like effect of the ice particles present in the exhaust trail.[10]

A Mars Reconnaissance Orbiter image of Phoenix (lower left corner) in the line of sight to the 10-km-wide Heimdall Crater (the craft is actually 20 km in front of it).
A Mars Reconnaissance Orbiter image of Phoenix (lower left corner) in the line of sight to the 10-km-wide Heimdall Crater (the craft is actually 20 km in front of it).
Closeup of Phoenix suspended from its parachute during descent through the Martian atmosphere.
Closeup of Phoenix suspended from its parachute during descent through the Martian atmosphere.

[edit] Landing

The Jet Propulsion Laboratory made adjustments to the orbits of three satellites around Mars to be in the right place on May 25, 2008 to observe Phoenix as it entered the atmosphere and to monitor it up to one minute after landing. This information will allow for better design for future landers.[11] The projected landing area was an ellipse 100 km by 20 km covering terrain which has been informally named "Green Valley"[12] and contains the largest concentration of water ice outside of the poles.

Phoenix entered the Martian atmosphere at nearly 21,000 km (13,000 miles) per hour, and within 7 minutes had to be able to decrease its speed to 8 km (5 miles) per hour before touching down on the surface. Confirmation of atmospheric entry was received at 4:46 p.m. PDT (23:46 UTC). Radio signals received at 4:53:44 p.m. PDT confirmed that Phoenix had survived its difficult descent and landed 15 minutes earlier, thus completing a 680 million km (422 million mile) flight from Earth.[13]

Parachute deployment was about 7 seconds later than expected, leading to a landing position some 25–28 km long (east), near the edge of the predicted 99% landing ellipse. The reason for this delay is not yet publicly known.

Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment (HiRISE) camera photographed Phoenix suspended from its parachute during its descent through the Martian atmosphere. This marks the first time ever one spacecraft has photographed another in the act of landing on a planet[13][14] (the Moon not being a planet, but a satellite). The same camera also imaged Phoenix on the surface with enough resolution to distinguish the lander and its two solar cell arrays. Ground controllers used Doppler tracking data from Odyssey and Mars Reconnaissance Orbiter to determine the lander's precise location as 68.218830°N 234.250778°E.[15] The landing site is here on the Google Mars web-based map and here on the NASA World Wind planetary viewer (free installation required; "MOLA Color (ASU)" is the Google image).

Landing site
Landing site
MRO image of Phoenix on the surface of Mars. Also see a larger image showing the parachute / backshell and heat shield.
MRO image of Phoenix on the surface of Mars. Also see a larger image showing the parachute / backshell and heat shield.

Phoenix landed in the Green Valley of Vastitas Borealis on May 25, 2008,[16] in the late Martian northern hemisphere spring (Ls = 76.73), where the Sun will shine on its solar panels the whole Martian day.[17] By the Martian northern Summer solstice (2008-06-25), the Sun will appear at its maximum elevation of 47.0 degrees. Phoenix will experience its first sunset at the start of September 2008.[17]

The landing was made on a flat surface, with the lander reporting only 0.3 degrees of tilt. Just before landing, the craft used its thrusters to orient its solar panels along an east-west axis to maximize power generation. The lander waited 15 minutes before opening its solar panels, to allow dust to settle. The first images from the lander became available around 7:00 p.m. PDT (2008-05-26 02:00 UTC).[18] The images show a surface strewn with pebbles and incised with small troughs into polygons about 5 m across and 10 cm high, with the expected absence of large rocks and hills.

Like the 1970s era Viking spacecraft, Phoenix used rocket motors for its final decent.[19] Experiments conducted by Nilton Renno, mission co-investigator from the University of Michigan, and his students have investigated how much surface dust would be kicked up on landing.[20] Researchers at Tufts University, led by co-investigator Sam Kounaves, will be conducting additional in depth experiments to identify the extent of the ammonia contamination from the hydrazine propellent and its possible effects on the chemistry experiments. In 2007, a report to the American Astronomical Society by Washington State University professor Dirk Schulze-Makuch, suggested that Mars might harbor peroxide-based life forms which the Viking landers failed to detect because of the unexpected chemistry.[21] The hypothesis was proposed long after any modifications to Phoenix could be made. One of the Phoenix mission investigators, NASA astrobiologist Chris McKay, stated that the report "piqued his interest" and that ways to test the hypothesis with Phoenix's instruments would be sought.

[edit] Surface Mission

[edit] Communications from the surface

Approximate-color photomosaic of cryoturbation polygons due to the Martian permafrost.
Approximate-color photomosaic of cryoturbation polygons due to the Martian permafrost.

The robotic arm's first movement was delayed by one day when, on May 27, 2008, commands from Earth were not relayed to the Phoenix lander on Mars. The commands went to NASA's Mars Reconnaissance Orbiter as planned, but the orbiter's Electra UHF radio system for relaying commands to Phoenix temporarily shut off. Without new commands, the lander instead carried out a set of activity commands sent May 26 as a backup. On May 27 the Mars Reconnaissance Orbiter relayed images and other information from those activities back to Earth.

"Phoenix is in perfect health," JPL's Barry Goldstein, Phoenix project manager, said Wednesday morning, May 28, 2008.

Scientists leading NASA's Phoenix Mars mission from the University of Arizona in Tucson sent commands to unstow its robotic arm and take more images of its landing site on May 28.

"We appear to have landed where we have access to digging down a polygon trough the long way, digging across the trough, and digging into the center of a polygon. We've dedicated this polygon as the first national park system on Mars -- a "keep out" zone until we figure out how best to use this natural Martian resource", Imager co-investigator Mark Lemmon of Texas A&M University said.[22]

The robotic arm was a critical part of the Phoenix Mars mission. It was needed to trench into the icy layers of northern polar Mars and deliver samples to instruments that would analyze what Mars is made of, what its water is like, and whether it is or has ever been a possible habitat for life.

Robotic arm manager Bob Bonitz of NASA's Jet Propulsion Laboratory, Pasadena, Calif., explained how the arm was to be unstowed on May 28. "It's a series of seven moves, beginning with rotating the wrist to release the forearm from its launch restraint. Another series of moves releases the elbow from its launch restraints and moves the elbow from underneath the biobarrier."

The polygonal cracking in this area had previously been observed from orbit, and is similar to patterns seen in permafrost areas in polar and high altitude regions of Earth. A likely formation mechanism is that permafrost ice contracts when the temperature decreases, creating a polygonal pattern of cracks, which are then filled by loose soil falling in from above. When the temperature increases and the ice expands back to its former volume, it thus cannot assume its former shape, but is forced to buckle upwards.[23] (On Earth, liquid water would probably enter at times along with soil, creating additional disruption due to ice wedging when the contents of the cracks freeze.)

The Lander's Robotic Arm touched soil on the red planet for the first time on May 31, 2008. It accurately scooped dirt, sampling the Martian soil for ice. The robotic arm will start digging after more days of testing.[24] Phoenix's Robotic Arm Camera took an image underneath the lander on sol 5 (see below) that shows patches of smooth bright surface uncovered when thruster exhaust blew off overlying loose soil. It is speculated that this may be ice.[25] Ray Arvidson of Washington University in St. Louis said: "We could very well be seeing rock, or we could be seeing exposed ice in the retrorocket blast zone."[26]

Phoenix footpad image, taken over 15 minutes after landing to ensure any dust stirred up had settled.

One of the first surface images from Phoenix.

View underneath lander towards south foot pad, showing patchy exposures of a bright surface, possibly ice.

Landing Site
Landing Site

A 360-degree panorama assembled from images taken on sols 1 and 3 after landing. The upper portion has been vertically stretched by a factor of 8 to bring out details. Visible near the horizon at full resolution are the backshell and parachute (a bright speck above the right edge of the left solar array, about 300 m distant) and the heat shield and its bounce mark (two end-to-end dark streaks above the center of the left solar array, about 150 m distant); on the horizon, left of the weather mast, is a crater. (Scroll right if you don't initially see them.)

Comparison between polygons photographed by Phoenix on Mars...

 ... and as photographed (in false color) from Mars orbit...

 ... with patterned ground on Devon Island in the Canadian Arctic, on Earth.

[edit] Hardware Overview

Lander systems include a RAD6000 based computer system for commanding the spacecraft and handling data,[27] and a digital telecommunications system that can communicate directly with Earth or via Mars Odyssey, Mars Reconnaissance Orbiter, or Mars Express, all now using turbo codes for error correction. The interconnections use the Proximity-1 protocol.[28]

Other parts of the lander are an electrical system containing solar arrays and batteries, a guidance system to land the spacecraft, six hydrazine engines, mechanical and structural elements, and a thermo-control system to ensure the spacecraft does not get too cold.

The lander has a mass of 350 kg, and measures 2.2 m tall by 5.5 m long with its solar panels deployed. The science deck is about 1.5 m in diameter.[28]

[edit] Scientific payload

Phoenix carries improved versions of University of Arizona panoramic cameras and volatiles-analysis instrument from the ill-fated Mars Polar Lander, as well as experiments that had been built for the canceled Mars Surveyor 2001 Lander, including a JPL trench-digging robot arm, a set of wet chemistry laboratories, and optical and atomic force microscopes. The science payload also includes a descent imager and a suite of meteorological instruments.[29]

[edit] Robotic arm and camera

The robotic digging arm. Left: at landing, with covering in place.  Right: the next day, with covering pushed aside.
The robotic digging arm. Left: at landing, with covering in place. Right: the next day, with covering pushed aside.

The Robotic Arm (RA) is designed to extend 2.35 m from its base on the lander, and have the ability to dig down to 0.5 m below the surface. It will take samples of dirt and water-ice that will be analyzed by other instruments on the lander. The arm was designed and built for the Jet Propulsion Laboratory by Alliance Spacesystems, LLC[30] in Pasadena, California. Commands were sent for the arm to be deployed on May 28, 2008, beginning with the pushing aside of a protective covering intended to serve as a redundant precaution against potential contamination of Martian subsoil by Earthly lifeforms. The Robotic Arm Camera (RAC) attached to the Robotic Arm just above the scoop is able to take full-color pictures of the area, as well as verify the samples that the scoop will return, and examine the grains of the area where the Robotic Arm has just dug. The camera was made by the University of Arizona and Max Planck Institute for Solar System Research,[31] Germany.[32]

Surface Stereo Imager (SSI) built by the University of Arizona.
Surface Stereo Imager (SSI) built by the University of Arizona.

[edit] Surface stereo imager

The Surface Stereo Imager (SSI) is the primary camera on the spacecraft. It is a stereo camera that is described as "a higher resolution upgrade of the imager used for Mars Pathfinder and the Mars Polar Lander".[33] It is expected to take many stereo images of the Martian Arctic. It will also be able, using the Sun as a reference, to measure the atmospheric distortion of the Martian atmosphere due to dust, air and other features. The camera was provided by the University of Arizona in collaboration with the Max Planck Institute for Solar System Research.[34][35]

[edit] Thermal and evolved gas analyzer

Thermal and Evolved Gas Analyzer (TEGA).
Thermal and Evolved Gas Analyzer (TEGA).

The Thermal and Evolved Gas Analyzer (TEGA) is a combination of a high-temperature furnace with a mass spectrometer. It will be used to bake samples of Martian dust, and determine the content of this dust. It has eight ovens, each about the size of a large ball-point pen, which will be able to analyze one sample each, for a total of eight separate samples. Team members can measure how much water vapor and carbon dioxide gas are given off, how much water-ice the samples contain, and what minerals are present that may have formed during a wetter, warmer past climate. The instrument will also be capable of measuring any organic volatiles, down to 10 ppb. TEGA was built by the University of Arizona and University of Texas at Dallas.[36]

On May 29, 2008, electrical tests indicated an intermittent short circuit in TEGA[37] . Specifically, the glitch is in one of the two filaments responsible for ionizing volatiles[38]. NASA worked around the problem by configuring the backup filament as the primary and vice-versa[39].

[edit] Mars Descent Imager

Mars Descent Imager built by Malin Space Science Systems.
Mars Descent Imager built by Malin Space Science Systems.

The Mars Descent Imager ("MARDI") was intended to take pictures of the landing site during the last three minutes of descent. As originally planned, it would have begun taking pictures after the aeroshell departed, about 8 km above the Martian soil.

Before launch, testing of the assembled spacecraft uncovered a potential data corruption problem with an interface card that was designed to route MARDI image data as well as data from various other parts of the spacecraft. The potential problem could occur if the interface card were to receive a MARDI picture during a critical phase of the spacecraft's final descent, at which point data from the spacecraft's Inertial Measurement Unit could have been lost; this data was critical to controlling the descent and landing. This was judged to be an unacceptable risk, and it was decided to not use MARDI during the mission.[40] As the flaw was discovered too late for repairs, the camera remains installed on Phoenix; it was not used to take pictures, nor was its built-in microphone used.[41]

After launch, an alternative plan was developed for MARDI to capture a single image during descent; but it was determined that this would have required changes to the timing of events during descent, so the alternative plan was also discarded, in favor of reducing risk.

MARDI images had been intended to help pinpoint exactly where the lander has landed, and possibly help find potential science targets. It was also to be used to learn if the area where the lander lands is typical of the surrounding terrain. MARDI was built by Malin Space Science Systems.[42]

MARDI is the lightest and most efficient camera ever to land on Mars. It would have used only 3 watts of power during the imaging process, less than most other space cameras. It had originally been designed and built to perform the same function on the Mars Surveyor 2001 Lander mission; after that mission was canceled, MARDI spent several years in storage until it was deployed on the Phoenix lander.

[edit] Microscopy, electrochemistry, and conductivity analyzer

A prototype wet chemistry beaker showing some of the electrochemistry sensors on the sides of the beaker.
A prototype wet chemistry beaker showing some of the electrochemistry sensors on the sides of the beaker.

The Microscopy, Electrochemistry, and Conductivity Analyzer (MECA) is an instrument package originally designed for the canceled Mars Surveyor 2001 Lander mission. It consists of a wet chemistry lab (WCL), optical and atomic force microscope, and a thermal and electrical conductivity probe.[43] The Jet Propulsion Laboratory built MECA. A Swiss consortium led by the University of Neuchatel contributed the atomic force microscope.[44] The University of Arizona designed the optical microscope. Tufts University developed reagents and sensors for the web chemistry lab.[45] Imperial College London provided the microscope sample substrates.[46]

Using MECA, researchers will examine soil particles as small as 16 μm across. They will measure electrical and thermal conductivity of soil particles using a probe on the robotic arm scoop.[47]

The robotic arm will scoop up some soil, put it in one of four wet chemistry lab cells, where water will be added, and while stirring, an array of electrochemical sensors will measure a dozen dissolved ions such as sodium, magnesium, calcium, and sulfate that have leached out from the soil into the water. This will provide information on the biological compatibility of the soil, both for possible indigenous microbes and for possible future Earth visitors. Sensors will also measure the pH and conductivity of the soil-water mixture, telling if the wet soil is super acidic or alkaline and salty, or full of oxidants that can destroy life.[48]

[edit] Thermal and Electrical Conductivity Probe (TECP)

The MECA contains a Thermal and Electrical Conductivity Probe (TECP).[47] TECP has four short fat probes and one port on the side of the housing that will make the following measurements:

Three of the four probes have tiny heating elements and temperature sensors inside them. One probe uses internal heating elements to send out a pulse of heat, recording the time the pulse is sent and monitoring the rate at which the heat is dissipated away from the probe. Adjacent needles sense when the heat pulse arrives. The speed that the heat travels away from the probe as well as the speed that it travels between probes allows scientists to measure thermal conductivity specific heat (the ability of the regolith to conduct heat relative to its ability to store heat) and thermal diffusivity (the speed at which a thermal disturbance is propagated in the soil).

The probes will also measure the dialectric permittivity and electrical conductivity, which can be used to calculate moisture and salinity of the regolith.

Needles 1 and 2 work in conjunction to measure salts in the regolith, heat the soil to measure thermal properties (thermal conductivity, specific heat and thermal diffusivity) of the regolith, and measure soil temperature. Needles 3 and 4 measure liquid water in the regolith. Needle 4 is a reference thermometer for needles 1 and 2. Port 5 measures relative humidity.

[edit] Meteorological station

The Meteorological Station (MET) will record the daily weather during the course of the Phoenix mission. It is equipped with a wind indicator and pressure and temperature sensors. The MET also contains a lidar (laser imaging detection and ranging) device for sampling the number of dust particles in the air. It was designed in Canada and supported by the Canadian Space Agency. A team headed by York University will oversee the science operations of the station. The York University team includes contributions from the University of Alberta, University of Aarhus (Denmark)[49], Dalhousie University,[50] Finnish Meteorological Institute,[51] Optech, and the Geological Survey of Canada. Canadarm maker MacDonald Dettwiler and Associates Ltd. of Richmond, B.C. built the MET.[52]

Meteorological Station (MET) built by the Canadian Space Agency.

Phoenix deployed and then imaged the MET weather mast that holds the wind-strength and direction-measuring telltale at a height of 2.3 m. This enhanced image shows wind from the northeast at day 3.

First Operation of Lidar on Mars, Telescope (black tube) and Laser window (smaller opening in fore-ground) can be seen.

Contour plot of second lidar operation. The colours show evolution of dust passing overhead with time (Orange = more dust, Blue = less dust)

The lidar laser is a passive Q-switched Nd:YAG laser with the dual wavelengths of 1064 nm and 532 nm. It operates at 100 Hz with a pulse width of 10 ns. The lidar is vertically pointing. The scattered light is received by two detectors that operate in both analog and photon counting modes.[53][54]

The lidar detects multiple types of backscattering (for example Rayleigh scattering and Mie Scattering), with the delay between laser pulse generation and the return of light scattered by atmospheric particles determining the altitude at which scattering occurs. Additional information can be obtained from backscattered light at 532 nm and 1064 nm, and such wavelength dependence may make it possible to discriminate between ice and dust, and serve as an indicator of the effective particle size.

The lidar will get information about the time-dependent structure of the planetary boundary layer by investigating the vertical distribution of dust, ice, fog and clouds in the local atmosphere. The surface wind velocity and temperatures will also be monitored over time and show the evolution of the atmosphere over the duration of the mission. Dust and ice contribution in the atmosphere and the formation of dust devils are in the science focus of the instrument.

The Lidar was operated for the first time at noon on Sol 3 (May 29, 2008), recording the first surface extraterrestrial atmospheric profile. This first profile indicated well mixed dust in the first few kilometers of the atmosphere, where the planetary boundary layer was observed by a marked decrease in scattering signal.

The image (at left) show the Lidar operating on Mars, with it's telescope (large black tube); laser window (small tube in foreground); shrouded in its thermal blanket.

[edit] The Phoenix DVD

The Planetary Society's "Phoenix DVD", on Mars.
The Planetary Society's "Phoenix DVD", on Mars.

Attached to the deck of the lander (next to the US flag) is the "Phoenix DVD",[55] compiled by the Planetary Society. The disc contains Visions of Mars,[56] a multimedia collection of literature and art about the Red Planet. Works include the text of H.G. Wells' War of the Worlds (and its infamous radio broadcast by Orson Welles), Percival Lowell's Mars as the Abode of Life with a map of his proposed canals, Ray Bradbury's The Martian Chronicles, and Kim Stanley Robinson's Green Mars. There are also messages directly addressed to future Martian visitors or settlers from, among others, Carl Sagan and Arthur C. Clarke. In 2006, The Planetary Society collected a quarter million names submitted through the Internet and placed them on the disc, which claims, on the front, to be "the first library on Mars".

The Phoenix DVD is made of a special silica glass[55] designed to withstand the Martian environment, lasting for hundreds (if not thousands) of years on the surface while it awaits discoverers.

The text just below the center of the disk reads:

“This archive, provided to the NASA Phoenix mission by The Planetary Society, contains literature and art (Vison of Mars), greetings from Mars visionaries of our day, and names of 21st century Earthlings who wanted to send their names to Mars. This DVD-ROM is designed to be read on personal computers in 2007. Information is stored in a spiral groove on the disc. A laser beam can scan the groove when metallized or a microscope can be used. Very small bumps and holes represent the zeroes and ones of digital information. The groove is about 0,74 microns wide. For more information refer to the standards document ECMA-268 (80 mm DVD Read-Only Disk).” (Source: http://blog.methemedia.com/archives/13)


[edit] Gallery

[edit] See also

[edit] References

  1. ^ NASA's Phoenix Spacecraft Reports Good Health After Mars Landing. Jet Propulsion Laboratory (2008-05-25). Retrieved on 2008-05-26.
  2. ^ Phoenix Lander Readied For Mars Exploration, space.com, Leonard David, 1 February 2007
  3. ^ "The Phoenix Mars Mission with Dr. Deborah Bass". Futures in Biotech podcast. 2007-09-19. No. 24.
  4. ^ "Mars 2007 'Phoenix' will Study Water near Mars' North Pole" August 4, 2003 NASA Press release. URL accessed April 2, 2006
  5. ^ Phoenix Mars Lander- Spacecraft. Phoenix Mars Lander. Retrieved on 2006-06-09.
  6. ^ Phoenix probe due to touch down on Martian surface. STFC. Retrieved on 2008-05-17.
  7. ^ NASA's Phoenix Mars Mission Begins Launch Preparations. NASA (2005-06-02).
  8. ^ Phoenix Mars Mission - Launch. University of Arizona. Retrieved on 2007-08-06.
  9. ^ Phoenix Noctilucent Cloud. University of Arizona. Retrieved on 2007-08-04.
  10. ^ Phoenix Mars Mission Logo. University of Arizona. Retrieved on 2006-07-20.
  11. ^ Spacecraft at Mars Prepare to Welcome New Kid on the Block. Retrieved on 2008-05-25.
  12. ^ NASA Spacecraft Fine Tunes Course for Mars Landing. NASA. Retrieved on 2008-05-25.
  13. ^ a b Phoenix Lands on Mars!. NASA (2008-05-25).
  14. ^ "Phoenix Makes a Grand Entrance", NASA. Retrieved on 2008-05-27. 
  15. ^ Lakdawalla, Emily (2008-05-27). Phoenix Sol 2 press conference, in a nutshell. The Planetary Society weblog. Planetary Society. Retrieved on 2008-05-28.
  16. ^ Phoenix Mars Mission.
  17. ^ a b Solar elevation varies from 3.2 to 46.3 degrees on May 25, and from 3.9 to 47.0 degrees on June 25, and from 0 to 43 degrees on September 2, verified using NASA's Mars24 Sunclock from http://www.giss.nasa.gov/tools/mars24/
  18. ^ Phoenix Mars Mission - Gallery. Arizona University (2008-05-26).
  19. ^ Phoenix Mars lander set to lift off. New Scientist (2007-08-03). Retrieved on 2007-08-04.
  20. ^ "U-M scientists simulate the effects of blowing Mars dust on NASA's Phoenix lander, due for August launch". University of Michigan News Service (2007-06-07).
  21. ^ Did probes find Martian life ... or kill it off?. Associated Press via MSNBC (2007-01-08). Retrieved on 2007-05-31.
  22. ^ Phoenix Mars Mission, NASA's Phoenix Spacecraft Commanded to Unstow Arm, University of Arizona, May 28, 2008
  23. ^ Harwood, William (2008-05-26). Satellite orbiting Mars imaged descending Phoenix. Spaceflight Now web site. CBS News. Retrieved on 2008-05-26.
  24. ^ thetechherald.com, Surface ice found as Phoenix prepares to dig
  25. ^ Rayl, A. J. S. (2008-06-01). Holy Cow, Snow Queen! Phoenix Landed on Ice Team Thinks. The Planetary Society web site. Planetary Society. Retrieved on 2008-06-03.
  26. ^ www.reuters.com, Phoenix lander samples a little Martian dirt
  27. ^ Power Architecture onboard Phoenix Mars Lander. Technology News Daily. Retrieved on 2008-04-13.
  28. ^ a b Phoenix Mars Mission FAQ. Retrieved on 2008-05-25.
  29. ^ Shotwell R. (2005). "Phoenix — the first Mars Scout mission". Acta Astronautica 57: 121–134. doi:10.1016/j.actaastro.2005.03.038. 
  30. ^ Mars ’01 Robotic Arm. Alliance Spacesystems. Retrieved on 2008-05-25.
  31. ^ RAC Robotic Arm Camera. Max Planck Institute for Solar System Research.
  32. ^ Keller, H. U., et al. (2001). "The MVACS Robotic Arm Camera". J. Geophys. Res. 106 ((E8)): 17609–17621. doi:10.1029/1999JE001123. 
  33. ^ Phoenix Mars Lander- SSI. Phoenix Mars Lander. Retrieved on 2008-05-25.
  34. ^ P. H. Smith, R. Reynolds, J. Weinberg, T. Friedman, M. T. Lemmon, R. Tanner, R. J. Reid, R. L. Marcialis, B. J. Bos, C. Oquest, H. U. Keller, W. J. Markiewicz, R. Kramm,F. Gliem and P. Rueffer (2001). "The MVACS Surface Stereo Imager on Mars Polar Lander". Journal of Geophysical Research 106 (E8): 17,589–17,607. doi:10.1029/1999JE001116. 
  35. ^ Reynolds R.O.,Smith P.H., Bell L.S., Keller, H.U. (2001). "The design of Mars lander cameras for Mars Pathfinder, MarsSurveyor '98 and Mars Surveyor '01". IEEE Transactions on Instrumentation and Measurement 50 (1): 63–71. doi:10.1109/19.903879. 
  36. ^ Boynton, W. V.; Quinn, R. C. (2005). "Thermal and Evolved Gas Analyzer: Part of the Mars Volatile and Climate Surveyor integrated payload". Journal of Geophysical Research 106 (E8): 17683–17698. doi:10.1029/1999JE001153. 
  37. ^ "NASA'S Phoenix Lander Robotic Arm Camera Sees Possible Ice". Retrieved on 2008-05-30. 
  38. ^ "Mars lander hunts ice and hits a snag". Retrieved on 2008-05-31. 
  39. ^ NASA press conference, 2008-06-02.
  40. ^ Mars Descent Imager (MARDI). University of Arizona (May 27, 2008).
  41. ^ Mars Descent Imager (MARDI) Update. Malin Space Science Systems (November 12, 2007).
  42. ^ Malin, M. C.; Caplinger, M. A.; Carr, M. H.; Squyres, S.; Thomas, P.; Veverka, J. (2005). "Mars Descent Imager (MARDI) on the Mars Polar Lander". Journal of Geophysical Research 106: 17635–17650. doi:10.1029/1999JE001144. 
  43. ^ Spacecraft and Science Instruments. Phoenix Mars Lander. Retrieved on 2007-03-10.
  44. ^ Atomic Force Microscope on Mars. Retrieved on 2008-05-25.
  45. ^ Tufts Journal: A decade of lab work hurtles toward Mars. Retrieved on 2008-05-29.
  46. ^ Imperial technology scanning for life on Mars. Science Business. Retrieved on 2008-05-26.
  47. ^ a b Decagon designs part of the Phoenix Mars Lander. Decagon Devices, Inc.. Retrieved on 2008-05-25.
  48. ^ Kounaves, S. P., S. R. Lukow, B. P. Comeau, M. H. Hecht, S. M. Grannan-Feldman, K. Manatt, S. J. West, X. Wen, M. Frant, and T. Gillette (2003). "Mars Surveyor Program '01 Mars Environmental Compatibility Assessment wet chemistry lab: A sensor array for chemical analysis of the Martian soil". J. Geophys. Res. 108 (E7): 5077. doi:10.1029/2002JE001978. 
  49. ^ marslab, Aarhus university, Denmark:The Telltale project. Retrieved on 2008-05-27.
  50. ^ "Mission: Mars". Retrieved on 2007-12-28.
  51. ^ "Phoenix probe takes FMI's pressure sensor to Mars" (In finnish). Retrieved on 2007-08-06.
  52. ^ Mars robot with Canadian component set for Saturday launch. Phoenix Mars Lander. Retrieved on 2007-08-03.
  53. ^ Allan Ian Carswell; Hahn, John F.; Podoba, Vladimir I.; Ulitsky, Arkady; Ussyshkin, Valerie; Michelangeli, Diane V.; Taylor, Peter A.; Duck, Thomas J.; Daly, Michael. LIDAR for Mars Atmospheric Studies on 2007 Scout Mission "Phoenix".
  54. ^ Whiteway, J.; Cook, C.; Komguem, L.; Ilnicki, M.; Greene, M.; Dickinson, C.; Heymsfield, A.. Phoenix Lidar Characterization.
  55. ^ a b The Phoenix DVD. Projects: Messages from Earth. Retrieved on 2007-08-06.
  56. ^ Visions of Mars.

[edit] External links

Wikimedia Commons has media related to:

[edit] LPL, LMSS, JPL and NASA links

[edit] Other links