Failing badly

From Wikipedia, the free encyclopedia

Failing badly and failing well are concepts in systems security and network security describing how a system reacts to failure. The terms have been popularized by Bruce Schneier, a cryptographer and security consultant.^[1]

A system that fails badly is one that fails catastrophically once failure occurs. A single point of failure can thus bring down the whole system. Examples include:

• Databases (such as credit card databases) protected only by a password. Once this security is breached, all data can be stolen.
• Buildings depending on a single column or truss, whose removal would cause a chain reaction collapse under normal loads.
• Security checks which concentrate on establishing identity, not intent (thus allowing, for example, suicide attackers to pass).
• Internet access provided by a single service provider. If the provider's network fails, all Internet connectivity is lost.

A system that fails well is one that compartmentalizes or contains failure. Examples include:

• Databases that do not allow downloads of all data in one attempt, limiting the amount of compromised data.
• Structurally redundant buildings conceived to resist loads beyond those expected under normal circumstances, or resist loads when the structure is damaged.
• Concrete structures, which show fractures long prior to breaking under load, thus giving early warning.
• Armoured cockpit doors on airplanes, which confine a potential hijacker within the cabin even if they are able to bypass airport security checks.
• Internet connectivity provided by more than one vendor or discrete path, known as multihoming.

[edit] See also

• Fail-safe

[edit] References