Aerosol spray
From Wikipedia, the free encyclopedia
 |
This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (April 2008) |
Aerosol spray is a type of dispensing system which creates an aerosol mist of liquid particles. This is used with a can or bottle that contains a liquid under pressure. When the container's valve is opened, the liquid is forced out of a small hole and emerges as an aerosol or mist. As gas expands to drive out the payload, some propellant evaporates inside the can to maintain an even pressure. Outside the can, the droplets of propellant evaporate rapidly, leaving the payload suspended as very fine particles or droplets. Typical liquids dispensed in this way are insecticides, deodorants and paints. An atomiser is a similar device that is pressurised by a hand-operated pump rather than by stored gas.
Contents |
[edit] History
The concepts of aerosol probably dates back to 1790.[1] The first aerosol spray can was invented in Oslo in 1926 by Erik Rotheim, a Norwegian chemical engineer.[1] The patent was sold to a US company for 100,000 Norwegian kroners.[citation needed] The Norwegian Post Office celebrated the invention by issuing a stamp in 1998.[2]
In 1941 the aerosol spray can was first put to good use by Americans Lyle Goodloe and William Sullivan, who are credited as the inventors of the modern spray can.[3] Their design of a refillable spray can (dubbed the “bug bomb”) patented in 1943 is the ancestor of many spray products. Pressurized by liquefied gas, the small portable can enabled soldiers to defend against malaria-carrying bugs by spraying inside tents in the Pacific during World War II.[4] In 1948, three companies were granted licenses by the United States government to manufacture aerosols. Two of the three companies still manufacture aerosols to this day, Chase Products Company and Claire Manufacturing. The "crimp-on valve", used to control the spray was developed in 1949 by Bronx machine shop proprietor Robert H. Abplanalp.[3]
[edit] Technology (aerosol propellants)
If the can was simply filled with compressed gas, either it would need to be at a dangerously high pressure, or the amount of gas in the can would be small, and would rapidly deplete. Usually the gas is the vapour of a liquid with boiling point slightly lower than room temperature. This means that inside the pressurised can, the vapour can exist in equilibrium with its bulk liquid at a pressure that is higher than atmospheric pressure (and able to expel the payload), but not dangerously high. As gas escapes, it is immediately replaced by evaporating liquid. Since the propellant exists in liquid form in the can, it should be miscible with the payload or dissolved in the payload.
Chlorofluorocarbons (CFCs) were once often used, but since the Montreal Protocol came into force in 1989, they have been replaced in nearly every country due to the negative effects CFCs have on Earth's ozone layer. The most common replacements are mixtures of volatile hydrocarbons, typically propane, n-butane and isobutane. Dimethyl ether (DME) and methyl ethyl ether are also used. All these have the disadvantage of being flammable. Nitrous oxide and carbon dioxide are also used as propellants to deliver foodstuffs (for example, whipped cream and cooking spray). Medicinal aerosols such as asthma inhalers use hydrofluoroalkanes (HFA): either HFA 134a (1,1,1,2,-tetrafluoroethane) or HFA 227 (1,1,1,2,3,3,3-heptafluoropropane) or combinations of the two.
[edit] Packaging
Modern aerosol spray products have three major parts; the can, the valve and the actuator or button. The can is most commonly lacquered tinplate (steel with a layer of tin) and may be made of 2 or 3 pieces of metal crimped together. Aluminium cans are also common and are generally used for more expensive products. The valve is crimped to the rig of the can, the design of this component is important in determining the spray rate. The actuator is depressed by the user to open the valve; the shape and size of the nozzle in the actuator controls the spread of the aerosol spray.
Packaging that uses a piston barrier system is often used for highly viscous products such as post-foaming hair gels, thick creams and lotions, food spreads and industrial products and sealants. The main benefit of the piston barrier system is that is assures separation of the product from the propellant, maintaining the purity and integrity of the formulation throughout its consumer lifespan. The piston barrier system also provides a controlled and uniform product discharge rate with minimal product retention and is economical. CCL Container, North America’s leading producer of impact-extruded aluminum packaging, has successfully launched a number of niche food brands such as cheese spreads, cake icing, pan and cooking sprays and food preservative sprays using the piston barrier system in a side range of shapes, styles and sizes. The piston barrier system from CCL Container conforms to FD requirements for most food products.
Another type of dispensing system is the bag-in-can system (or BOV “bag on valve”). This system separates the product from the pressurizing agent with a hermetically-sealed, multi-layered laminated pouch, which maintains complete formulation integrity so only pure product is dispensed. Among its many benefits, the bag-in-can system extends a product’s shelf life. The bag-on-valve, or ABS, is widely used by sun care marketers for its benefits: all-attitude (360-degree) dispensing, quiet and non-chilling discharge. This bag-in-can system is also used in the packaging of pharmaceutical, industrial, household, pet care and other products that require complete separation between the product and the propellant.
[edit] Health concerns
There are two main areas of health concern linked to aerosol cans:
- Deliberate inhalation of the contents to gain a high from the propellant
- The piggy-backing of more dangerous particles into the respiratory tracts
[edit] See also
[edit] References
- ^ a b Bellis, Mary The History of Aerosol Spray Cans
- ^ Image of the Norway Postage stamp
- ^ a b Kimberley A. McGrath (Editor), Bridget E. Travers (Editor). World of Invention "Summary". Detroit: Thomson Gale. ISBN 0-7876-2759-3.
- ^ Core, Jim, Rosalie Marion Bliss, and Alfredo Flores. (September 2005) "ARS Partners With Defense Department To Protect Troops From Insect Vectors". Agricultural Research MagazineVol. 53, No. 9 .
[edit] Further reading
- Brody, A. L., and Marsh, K, S., "Encyclopedia of Packaging Technology", John Wiley & Sons, 1997, ISBN 0-471-06397-5
- ASTM D3069 Delivery Rate of Aerosol Products
- ASTM D3065 Flammability of Aerosol Products
- ASTM D3094 Seepage Rate of Aerosol Products
